PhantomX

**I tried to search for a article on how to Remove integra door panels but found nothin, maybe you guys can help** I got a 95 Integra.... I tried to install my TypeS speakers with out removing my door panel...but now i think i need too.... right now the right speaker is being held up by one bolt...I cant reach the other bolts holes because the speaker housing is soo small....

Also.. is it ok for the speaker to be touching the door panel??

heres sum pix....





tips or pix on how to remove the door panels will help... thankx

maniefrizzle

unscrew the door handle and lock (just 2 screws total). pull the panel from the bottom first, it's all plastic pegs, then lift up.

1-slo-2-cam

Yea what he said theres nothing to it!

illmaticimports

look around for as many screws as possible than pull up

mlsmith95gsr

I would definitely try to get in at least another screw because your speakers will vibrate against the door and rattle. If the tweeter is touching the inside the door panel, it should be okay because the tweeter has a cover on it and the speaker itself shouldn't touch anything. I'm with these guys in saying to remove the door. It's fairly simple to do.

Johnny_Rocket

Will it work... yea, but it will sound like ****. Do like everyone said, there's a couple screws and a bunch of plastic clips and you're done. it's cake dude

J.nguyen

i have type s speakers in mines aahh what a coincidence


hooked up with

and 4 chan amp

Usagi Yojimbo

iTrader: (1)

no, its not ok for the speaker to be touching the door panel. Depending on what type and guage of wire you are running, it'll affect the total output and range of the speakers sound and give the effect of worst distortion.

gsr dood

door panels are easier to take off than emblems.

Sic_DA_Nine

i have them same ****...:]

2ndName

But he will most likely run into problems when trying to get the panel back on.

To get the panel off, there are 2 screws I believe. One underneath the door handle. The other one is located on the lower front of the door panel.

raverx3m

iTrader: (1)

ha i got TYPE-S components in my fronts
by the way did u guys use honda speaker case or u followed the instruction and drilled out the door?

the honda speaker case will hold it u just gotta cut it out completely leaving only outside ring with screw holes in it and use the bracket that came with alpines that way it will have some space for the pannels

zeroz

theres an article on teamintegra .. to lazy to get link now...

07ssmfit916

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeroz &raquo;</TD></TR><TR><TD CLASS="quote">theres an article on teamintegra .. to lazy to get link now...</TD></TR></TABLE>

lol
http://www.team-integra.net/se...D=591

RSD

i tried to remove the panel of my sedan and i gave up after a while and walked away with sore fingers. i removed the 3 screws and floowed the TI guide but when i try to pry open the panel from the bottm it dont budge. i tried using a screwdriver as leverage but that just resulted in a bent speaker mount. taking car to my uncle who owns a body shop and just get him to remove em.

PhantomX

thankx... for the quick repliez..

I also had to drill out the stock brackets too...wut did u guys use??... i used a Dremel...*best tool ever, i think**

zeroz

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RSD &raquo;</TD></TR><TR><TD CLASS="quote">i tried to remove the panel of my sedan and i gave up after a while and walked away with sore fingers. i removed the 3 screws and floowed the TI guide but when i try to pry open the panel from the bottm it dont budge. i tried using a screwdriver as leverage but that just resulted in a bent speaker mount. taking car to my uncle who owns a body shop and just get him to remove em.</TD></TR></TABLE>

yeah on some cars (like Mine) it felt like it wasn't gonna budge and i was a alittle afriad i might break something but after 5 mins i got mad and juss yanked on the **** as hard as i could and sure enough it came out. but my cousins ls we were doing it and i was helping him and i thought it was going to be hard like mines was but it wasn't it was pretty easy and i riped that sucker out and fell in the car lol

Rms13

you shoulda opted for components..i have type r 6.5 componets and they sound great!

PhantomX

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rms13 &raquo;</TD></TR><TR><TD CLASS="quote">you shoulda opted for components..i have type r 6.5 componets and they sound great!</TD></TR></TABLE>

I was thinkin about it... but naa... i only got my Type S for only 52 bux per pair....BestBuy discount hehe

I just finished installin my fronts and put back my door panels....man it sounds freakin Great!!.....ALPINE ALL THE WAY!!!!


Modified by PhantomX at 2:36 PM 1/6/2006