gsr cel code 8?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Location: sacramento, Ca, U.S
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
gsr cel code 8?
My car is throwing code 8 which is tdc sensor. Does this mean i need a new distributor?
96 integra gsr. My car is eating lots of gas now like 120 miles for a full tank. Use to be around
280-330 miles for full tank.
96 integra gsr. My car is eating lots of gas now like 120 miles for a full tank. Use to be around
280-330 miles for full tank.
#2
Re: gsr cel code 8?
its about your distributor but it could be your connection has gone bad. did measure the resistance on your 8P connector?
im also having the exact problem as you but i have a 95 gsr. i just need someone who can measure mines correctly because i dont know how. i have the helms manual
im also having the exact problem as you but i have a 95 gsr. i just need someone who can measure mines correctly because i dont know how. i have the helms manual
#3
Honda-Tech Member
Join Date: Jun 2009
Location: Greenville, SC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: gsr cel code 8?
Code 8 Top dead center sensor
you could fix it buy rebuilding the dizzy, but its not easy. get one index card and space the sensors inside of it, using the index card. i cant remember if it the middle one or not, there's 3 in all. I had a code 8 on my gsr before too. and its almost the same thing. and if it doesn't fix your problem, just buy a new dizzy.
hope this helps
ehh.. just saw yours is a 96. mine is a 95. but its still your dizzy. and the above should still help. just make sure you get the spacing right. oh and if you strip the screws inside the dizzy(very easy to do!) uses wire cutters on the side to break them loose.
you could fix it buy rebuilding the dizzy, but its not easy. get one index card and space the sensors inside of it, using the index card. i cant remember if it the middle one or not, there's 3 in all. I had a code 8 on my gsr before too. and its almost the same thing. and if it doesn't fix your problem, just buy a new dizzy.
hope this helps
ehh.. just saw yours is a 96. mine is a 95. but its still your dizzy. and the above should still help. just make sure you get the spacing right. oh and if you strip the screws inside the dizzy(very easy to do!) uses wire cutters on the side to break them loose.
Last edited by simboy2003; 03-22-2010 at 12:47 AM. Reason: added more
#4
Re: gsr cel code 8?
wat if its the wiring? i think i measured it right and i didnt get 350-700 ohms i got nothing. do i measure just that one connector or both together. sorry i aint good with electrical stuff
#7
Honda-Tech Member
Join Date: Jun 2009
Location: Greenville, SC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: gsr cel code 8?
yeah you should. on the dizzy side, tho. hum ur checking then 1 and 2, then 3 and 4. so on and so on right. 1,3,5 on top and 2,4,6 under them. just like on the ecu pin outs?
Trending Topics
#9
Honda-Tech Member
Join Date: Jun 2009
Location: Greenville, SC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: gsr cel code 8?
huh that's odd you should get something. try another dizzy and see where that gets you. sorry i could help more. im sure i could figure it out if i was there in person.
Thread
Thread Starter
Forum
Replies
Last Post