bolt size help
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: Fort Wayne, IN, USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
bolt size help
what are the bell housing bolt size and the 2 bolts #21 on the rear mount bottom #10
http://www.acuraoemparts.com/delray/...All&vinsrch=no
and yes i have searched and yes i looked in Common Honda Bolt thread pitch size dimension thread
http://www.acuraoemparts.com/delray/...All&vinsrch=no
and yes i have searched and yes i looked in Common Honda Bolt thread pitch size dimension thread
#2
Honda-Tech Member
Join Date: Jun 2000
Location: Bay Area, CA, USA
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Re: bolt size help
The acura page lists #21 as "BOLT, FLANGE (14X67)", so it's M14 by 67 millimeters length. Also, the common bolt thread lists it as M14 x 1.25 thread pitch. The trans bolts should be M12 x 1.25. The lengths will probably be on the acura parts site.
#7
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 53 Likes
on
47 Posts
Re: bolt size help
Helms lists the thread size and pitch, but I don't have it handy right now.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: Fort Wayne, IN, USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Re: bolt size help
i tried the 12x1.25 die on the bolts that every one says is 12x1.25 like the bolts that mount the tranny to the motor and the die is to small.
for the other ones like #21 i know are bigger just do not know the size
ok i found out that my die was to small mismarked
12x1.25 is the size sorry and thanks
and the bolts for #21 are 14x1.5
for the other ones like #21 i know are bigger just do not know the size
ok i found out that my die was to small mismarked
12x1.25 is the size sorry and thanks
and the bolts for #21 are 14x1.5
Last edited by dkrex001; 02-21-2009 at 11:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post