axle internal help
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: Trial User
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
axle internal help
Im trying to remove the axle that goes into the hub to replace my bearings, after i remove the boot. how to i disconntect that end from the shaft?
#2
Daisy... Daisy...
Re: axle internal help (CRX_Control)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX_Control »</TD></TR><TR><TD CLASS="quote">Im trying to remove the axle that goes into the hub to replace my bearings, after i remove the boot. how to i disconntect that end from the shaft?</TD></TR></TABLE>
You are supposed to remove the axle nut in the center of the hub, separate the lower ball joint, and then slide the axle stub out of the hub. You do not need to touch the boot.
The axles slide out of the hubs after removing part #20.
This is the hub.
You are supposed to remove the axle nut in the center of the hub, separate the lower ball joint, and then slide the axle stub out of the hub. You do not need to touch the boot.
The axles slide out of the hubs after removing part #20.
This is the hub.
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: Trial User
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Re: axle internal help (Dogginator)
sorry but i guess i frased it wrong . I found what im lookin for tough
Remove by hitting that ring , Its just like poppin the axle out the tranny heh.
Remove by hitting that ring , Its just like poppin the axle out the tranny heh.
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Giggles
Honda CRX / EF Civic (1988 - 1991)
5
01-23-2007 06:15 PM