rockwilda

im installing my springs/shock set up on friday on my 00 gsr.

any advice or trouble i should look out for?

TIA

justinCO

Kinda depends, are these "true" coilover shocks or shocks with lowering springs? If you're doing the latter you'll need a spring compressor to take apart the stock shocks cause you'll need to use some of the parts. I rented my spring compressors at Checker Auto, they charge you $50 bux then credit you back the $50 bux when you return them. Other than that just get the right tools, if I recall you'll need a 12mm, 14mm, and 17mm sockets. Also a torque wrench of some sort and jack stands. There is a really really good set of instructions on how to do suspension on a Teg. I just did the same thing about 2 weekends ago and followed these instructions, it was simple, no problems whatsoever. Here is the instructions: http://www.bseries.net/html/garage/spring.php

If you want you can look at my install pics too to get an idea of what you'll be looking at: http://www.jackmoves.com/glowecon/ca...nsion_install/

Hope this helps.

Justin



[Modified by justinCO, 2:39 PM 1/24/2002]

JCushing

make sure they have the rear lower control arm bolt for the strut in stock

rockwilda

yeah its a true coilover system..ZEAL B2's

can someone give me some torque specs for the suspension...tia

ALF

Be prepared to possibly break your rear LCA bolts. But since your car is a 2k model, you should have no problems. Good luck!

Neo

If you can, try to get (borrow or buy) an electric impact wrench, the kind that plugs into your cigarette lighter. I've seen it used on several spring/shock install jobs (including mine) and it works like a charm. Haven't seen or heard about it breaking a LCA bolt yet. Good luck.