Richard Davis

I have a 1996 acura integra I pulled the right side cv axle out and I can't get it back in there is something in the way from what I have asked around people say it is called a LSD so if u can help me out in any way before I have to take out the transmission. Thank u

wunfstgsr

What I do is grab the jack handle and wrap the end with a thick rag and wack the axle back in with a hammer, be careful not to rip the axle boot! set the jack handle on the thick part of the axle and tap it in. They usually wont go in by pushing it by hand.

thewrai6th

LSD gives traction to both wheels, Limited Slip Differential. This is not preventing you from installing your axle. Also, you don't have LSD unless it's aftermarket or you have a Type-R transmission.
The trick I use is to put the axle in the brake-side hub and attach with the nut, then try to align it into the transmission. While pushing really hard on the axle (you have to get the c clip past a notch) I have someone rotate the hub. It will usually just pop in. It can take some force though. You can also try the same thing by pressing against the hub.
You should not take out the transmission for this.
Good luck!

BiggieBert

It takes some force to set the c clip