1995 Acura Integra SE progress thread.
01-09-2014, 09:14 PM
#30
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
One hi hid ballast blew so only have 1 High beam as of now
Fog lights wired
Cai installed!!!!!
Wheel wells were painted all black
And charcoal wheels
Fog lights wired
Cai installed!!!!!
Wheel wells were painted all black
And charcoal wheels
01-09-2014, 10:59 PM
#32
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
I'm gonna run some 13" wheels with brembo brakes I got and thinking about deleting rear breaks and just using passenger axle.
01-10-2014, 01:42 PM
#33
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
So finally put the starter on. Jumped the battery
Cranked for about 1.5 seconds and it turned on!
Great idle. No fluctuation, oil pressure was good, no over heating
Perfect.
The hose I did get for the oil pressure gauge wasnt the correct one. So about 20 min later it burst.
Just have to replace that line
Other than that, the engine is fine. A little loud tho. Idk why.
Still need alignment and driver side axle and to connect rear away bar and brakes bled
Cranked for about 1.5 seconds and it turned on!
Great idle. No fluctuation, oil pressure was good, no over heating
Perfect.
The hose I did get for the oil pressure gauge wasnt the correct one. So about 20 min later it burst.
Just have to replace that line
Other than that, the engine is fine. A little loud tho. Idk why.
Still need alignment and driver side axle and to connect rear away bar and brakes bled
10-10-2015, 02:08 AM
#35
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
This update may be for my personal use later on and for anyone just interested in this journey of the car.
The engine i put in most recently on the thread started knocking one day, didn't even deal with it. pulled that s#@t out and bought a b20 with some 4x,xxx miles.
I bled the living hell out of the abs system, abs light comes on sometimes but i have no interest in addressing it when it does.
I replaced the starter so far on it, passenger axle and thats about it.
has been sitting for about a year now and is starting to take sun damage on the hood. drove it last year just before the tags expired, which at the same time the battery and starter started to fail, i did not want to risk getting stuck somewhere, so it was under the tree she goes.
Partially why its sitting is its not my dying need to have this car running. i try to start it once every 2 weeks and drive it around the block.
the b20 is running real well. i think I've put an extra 400 miles in a year on the b20.
took my chipped lsv ecu and got a stock ls map on it, launch control(idk what thats even set at since its been so long since i launched it) cel shift light, and a rev limiter(also set at idk what)
got so windy one day, blew my window visors off, threw both away.
those side markers above? still in a box.
it has 2 steelies and 2 gsr rims because the tires are so bad lol.
ill snap some pics of it later and post them up.
The engine i put in most recently on the thread started knocking one day, didn't even deal with it. pulled that s#@t out and bought a b20 with some 4x,xxx miles.
I bled the living hell out of the abs system, abs light comes on sometimes but i have no interest in addressing it when it does.
I replaced the starter so far on it, passenger axle and thats about it.
has been sitting for about a year now and is starting to take sun damage on the hood. drove it last year just before the tags expired, which at the same time the battery and starter started to fail, i did not want to risk getting stuck somewhere, so it was under the tree she goes.
Partially why its sitting is its not my dying need to have this car running. i try to start it once every 2 weeks and drive it around the block.
the b20 is running real well. i think I've put an extra 400 miles in a year on the b20.
took my chipped lsv ecu and got a stock ls map on it, launch control(idk what thats even set at since its been so long since i launched it) cel shift light, and a rev limiter(also set at idk what)
got so windy one day, blew my window visors off, threw both away.
those side markers above? still in a box.
it has 2 steelies and 2 gsr rims because the tires are so bad lol.
ill snap some pics of it later and post them up.
Last edited by JDMswagSerf; 05-02-2016 at 10:36 PM.
02-08-2016, 01:47 AM
#37
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Picked up some LS mesh rims off a friend. Which are for sale by the way as I do not want them! In SoCal pm me for info. 9/10 condition.
Picked these jmags up the other day.
Once I Sell the LS I may get tires for the jmags
And just some interior pictures.
The blue toggle is to turn on my accessories without using the key. (Cigarette lighter and radio) a great amenity by the way.
With tax season here. I should be paying the registration fees and smogging and it and getting a new axle so I can finally daily it.
Currently looking for some used green s tech tein springs.
Once it is ready to daily I am going to color sand it and buff it to bring back its shine.
Picked these jmags up the other day.
Once I Sell the LS I may get tires for the jmags
And just some interior pictures.
The blue toggle is to turn on my accessories without using the key. (Cigarette lighter and radio) a great amenity by the way.
With tax season here. I should be paying the registration fees and smogging and it and getting a new axle so I can finally daily it.
Currently looking for some used green s tech tein springs.
Once it is ready to daily I am going to color sand it and buff it to bring back its shine.
02-13-2016, 09:31 PM
#38
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Traded the j mahs for these wheels.
(Ignore my captions)
The time for this thing to being street legal is near!
A potential buyer is going to look at it tomorrow. So the end is near.
If I does not sell I am going to get some tires that actually fit the wheels. I do not want a stretched look. The wheels are going to pop out, I may buy some flares. I have always loved the flare look on any car.
(Ignore my captions)
The time for this thing to being street legal is near!
A potential buyer is going to look at it tomorrow. So the end is near.
If I does not sell I am going to get some tires that actually fit the wheels. I do not want a stretched look. The wheels are going to pop out, I may buy some flares. I have always loved the flare look on any car.
02-15-2016, 05:59 PM
#39
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Took the car for a spin today and did a launch. Unbelievable how much wheel spin I had.
When I take the car to get tuned I may have them drop the launch control some.
Other than that, the car is running top notch.
Jump starting it. The car starts on the very first crank. I mean you don't even hear the started begin to work before the engine is on. I love it.
When I take the car to get tuned I may have them drop the launch control some.
Other than that, the car is running top notch.
Jump starting it. The car starts on the very first crank. I mean you don't even hear the started begin to work before the engine is on. I love it.
02-15-2016, 08:47 PM
#40
Honda-Tech Member
Re: 1995 Acura Integra SE progress thread.
Sup serf. This is tj from jdmu. I'm stoked that you still have the integra and I see that it's been through a lot. I actually got a 95 special edition last year and it's bone stock but got hit and run 2 days before New Years. I'll start a thread one day cas I'm waiting on parts to come in first
02-15-2016, 09:34 PM
#41
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Sup serf. This is tj from jdmu. I'm stoked that you still have the integra and I see that it's been through a lot. I actually got a 95 special edition last year and it's bone stock but got hit and run 2 days before New Years. I'll start a thread one day cas I'm waiting on parts to come in first
Yea still have this car. Through the ups and downs and mostly downs.
I think i saw your civic sold from instagram? And yea I saw you had a clean acura then saw the wreck. What a crappy way to end a year but hope all is well with you man! Definately get a thread going for it when you get some parts.
02-15-2016, 09:58 PM
#43
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
03-20-2016, 08:17 PM
#45
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Sorry for triple post. 
Finally got a new axle and new tires.
This is what the driveway looked like today for a few hours, damn axle wouldnt seperate from intermediate shaft, had to go to autozone and use a puller typw tool to seperate the 2!
For the first time in a few years it was driven more than 2 blocks away for a car wash and a gas fill up!
Its running well! It seems like it wont get up to operating temp though, i need to look into that.
Next on the list is a brake job all around. Then new ball joints.
Finally got a new axle and new tires.
This is what the driveway looked like today for a few hours, damn axle wouldnt seperate from intermediate shaft, had to go to autozone and use a puller typw tool to seperate the 2!
For the first time in a few years it was driven more than 2 blocks away for a car wash and a gas fill up!
Its running well! It seems like it wont get up to operating temp though, i need to look into that.
Next on the list is a brake job all around. Then new ball joints.
10-21-2021, 11:33 PM
#46
Shit Posts: 15
Thread Starter
Re: 1995 Acura Integra SE progress thread.
Ahh, memories.
After I got the new tires and wheels and b20 engine, I drove it 1k miles and parked it.
clear on the wheels has began peeling, the tires don’t look too well either.
the clear on the paint has faded beyond repair.
One day when I have more time, I will restore it.
After I got the new tires and wheels and b20 engine, I drove it 1k miles and parked it.
clear on the wheels has began peeling, the tires don’t look too well either.
the clear on the paint has faded beyond repair.
One day when I have more time, I will restore it.
Thread
Thread Starter
Forum
Replies
Last Post
frost_white_ej1
Forced Induction
23
08-13-2017 07:21 AM
import-tooner
Vehicles for sale
95
09-25-2004 12:34 AM