I've been at school for the past couple weeks and i came home for my birthday this weekend(bday was thursday the 16th). I got a Fujifilm finepix A330, so i decided to wash the car and take it out for a quick photoshoot. I made a few sad attempts at being artistic, but hey at least i tried. let me know what you think and if anybody has experience with the camera, pointers are always good


just got done washing it


Last night's rain





























Modified by PA MATT at 1:03 PM 9/19/2004

 

You should change some of those exterior pics for pics of the engine bay. I'm sure much of the work done is on the motor correct?

Fix the muffler, give it a drop, some new wheels and you're hot

 

yeh..the car came with that fartcan on there and I'm just leaving it for now. and you are correct that most of the money is into the motor....stock d16z6 until i can afford to build it, 5.5 psi on greddy 15g kit, greddy type 31 intercooler, dsm 450cc injectors, egt gauge and boost gauge(as you can see), falken ziex 195/60 tires, uberdata, greddy type s bov. For the money, i'm very happy with the car. next mod is to lower it then i'd like to get a boost controller and run about 7 pounds. eventually I'd like to build the motor if I keep it long enough Concerning the wheels, I actually like the "baby hammers", but may invest in something aftermarket eventually.

 

wheres the motor shots

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by street dreams &raquo;</TD></TR><TR><TD CLASS="quote">wheres the motor shots</TD></TR></TABLE>

ya.

That muffler

 

oh cmon...the mufflers not nice, but its not that bad...its an n1 style that came with it and i have better things to spend my money on right now like an education

 

sunday morning bump...i'll try and get some motor shots even though its nothing special

 

keepin' it sleeper

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by street dreams &raquo;</TD></TR><TR><TD CLASS="quote">wheres the motor shots</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DxHatchback &raquo;</TD></TR><TR><TD CLASS="quote">keepin' it sleeper </TD></TR></TABLE>
thanks for the positive response....

 

motor shots i found

 

nice sleeper, i don't like the muffler though. it points down

 

the **** that had the car before me had it welded on to stock piping that he had re-ran for some reason and there is no hanger on there. I plan on getting full 3" exhaust with a not so gay muffler in the next couple of months anyways

 

keep it sleeperish, i would leave those rims and leave the look just like that.. then dump all of your money in the motor.

 

slam that ****....to the floor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sikciv666 &raquo;</TD></TR><TR><TD CLASS="quote">slam that ****....to the floor</TD></TR></TABLE>



any times with that setup yet?

 

Bump, PA is tryin' to do it like CA !!! Nice Del Sol...

 

ran it in high humidity and a heat soaked manifold with a shitty 60 ft time of 2.46 and managed a 9.8 in the 1/8th...not anything impressive but something to work on. keep in mind this is stock suspension, stock exhaust, stock downpipe, stock boost,etc


Modified by PA MATT at 8:34 PM 9/20/2004

 

nice

 

STOCK as anything Exterior hahaha Nice Front Mount though

 

get a new exhaust. paint the intercooler black.
then work on the engine.
done.

thats what i would do.

 

yeh..im planning on leaving it fairly stock looking. I'd like to lower it a bit, but not slamming it...these pa roads suck. How many of you would recognize that it's boosted drivin by it on the street?

 

lookin good homie...now get 3inch and some tuning and bump that **** to 10psi

 

I'm pretty well decided that I'll be gettin 3-inch exhaust instead of suspension as soon as i figure out what I'll have left after next semester