What do I need to do in order to get these to fit? I can tell that the rails are a bit different, so is it just a simple process of unbolting one set and bolting them to the other?

 

yes...unbolt your old ones, bolt them to new ones.

 

It looks like when you unbolt them, you have to remove pretty much everything and the seatback looks like it's fixed to the rails too. Anything to be careful of when I give it a try?

 

You have to swap the rails I think.. I might be wrong though

 

No need to swap rails, straight bolt out and bolt in procedure.

 

no, its not a direct bolt in... remove the 10mm bolts on the bottoms of each set of rails and swap the rails and not the complete frame. You do not have to seperate the seats. I did this on my EJ and it took about 30 mins to figure it out

 

That's the first time i've heard about that. weird.


[Modified by spooGEN, 11:31 PM 11/10/2001]

 

Del Sol seats will fit perfectly, no need for any changes.

 

So...weve got a big problem it seems. Who to beleive? Del Sol seats DO mount right in to an EG...or they DON'T....

ANYONE KNOW THE ANSWER FOR SURE?

 

Believe me that has put Del sol seats into EG, EK, and ef, U need to change the rails cause the bent up front is different and will save you the time you will be spending with a hammer. There are three 17mm bolts on one side, thats the side that has the adjustable tilt, and on the other there are Two Nuts and a screw, all 12mm
It is not Hard just dont tangle the Wire that goes across, cause then it becomes a puzzle to get it back straight.

 

Swap the rails!
BTW anyone got a set of stock EG rails they wanna get rid of?