i was told this was p28 chipped for my boost..... nothing looks like its soldered on for the eprom

he said it was just a p06 case with p28 guts.....

tell me what u think thanx

 

that looks like a regular p06 to me

 

It's a P06 board. Look at the barcode label on the connector. "37820-P06-C02"

 

ok i have a b16a2 turbo with itr valvetrain, walbro fuel pump and 440cc rc injectors....

i should NOT b running my car with this ecu .... ****

 

I can cnfirm that upon looking at that, it is a p-06 ecu.

 

can these ecu's be programmed for b16a's ?

 

Get a p28. Do it right the first time

 

It's a P06 that was converted to run VTEC. Notice the high-side switch at position IC14. As long as there is a P28, P30 or P72 based program on the ROM it will run VTEC. Also the code 301 on the MCU says it is definitely a P06.

 

it was supposed to be a p28

did you not read

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim Truett &raquo;</TD></TR><TR><TD CLASS="quote">It's a P06 that was converted to run VTEC. Notice the high-side switch at position IC14. As long as there is a P28, P30 or P72 based program on the ROM it will run VTEC. Also the code 301 on the MCU says it is definitely a P06.</TD></TR></TABLE>

thanx.... so it is chipped then

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim Truett &raquo;</TD></TR><TR><TD CLASS="quote">It's a P06 that was converted to run VTEC. Notice the high-side switch at position IC14. As long as there is a P28, P30 or P72 based program on the ROM it will run VTEC. Also the code 301 on the MCU says it is definitely a P06.</TD></TR></TABLE>

good info, most people are not aware of this

 

can you circle this part??