Water cooling kit for your turbo *stainless lines*
Thread Starter
Member
Joined: Mar 2002
Posts: 1,024
Likes: 0
From: US
Water cooling kit for your turbo *stainless lines*
Im selling a kit consisting of ss braided lines -5an and all fittings to tap off of the heater hoses. This means that you wont have to bypass the throttle body hose. It comes with 3/8 pipe to -5an adapters for the turbo, 2 brass tees for the heater lines, barbed fittings to connect the heater hoses to the tees, adapters for the tees to the -5an lines and 2 3ft sections of stainless braided lines with the ends already attached. Depending on the manifold you may need to use a 90 deg fitting on the motor side of the turbo.
This is all brand new execpt I had the two fittings screwed into the turbo with nothing attached to them but everything else has been sitting on the table.
I am selling because I decided to go with a precision turbo now and it is not watercooled.
Asking 75+shipping OBO PM me.
Modified by BlueSi2k at 3:17 PM 11/24/2003
This is all brand new execpt I had the two fittings screwed into the turbo with nothing attached to them but everything else has been sitting on the table.
I am selling because I decided to go with a precision turbo now and it is not watercooled.
Asking 75+shipping OBO PM me.
Modified by BlueSi2k at 3:17 PM 11/24/2003
Trending Topics
up 
Honda-Tech Member
Joined: Jan 2003
Posts: 6,882
Likes: 0
From: San Jose, CA, USA
Re: Water cooling kit for your turbo *stainless lines* (BlueSi2k)
pics to buddha_lover68@yahoo.com please
Thread Starter
Member
Joined: Mar 2002
Posts: 1,024
Likes: 0
From: US
Re: Water cooling kit for your turbo *stainless lines* (bucbaby)
Kit is most likely sold im just waiting for pickup. There is a pic in the first post just let it load the servers slow. Ill let you know if it doesn't sell.
Thread
Thread Starter
Forum
Replies
Last Post
lojackgsr
Forced Induction
2
Apr 27, 2008 03:03 PM
