help swaping a d16z6 into a 92 civic cx
what do i need as wiring goes and is there anything that i would need other than that.
thanks in advance
drew
p.s. i just got the car ive been waiting for, i waited about 8 months
thanks in advance
drew
p.s. i just got the car ive been waiting for, i waited about 8 months
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onefastcivic »</TD></TR><TR><TD CLASS="quote">would it be easier to use the si wiring harness instead of the cx</TD></TR></TABLE>
Yes, if you use the Si engine harness, the swap will be plug and play. ALL 92 Civic's (your CX included) are prewired for VTEC on the cabin harness side so by using a VTEC engine harness, there will be no additional wiring for the VTEC solenoid or pressure switch. Using your stock engine harness is also an option but you will need to add the wiring for the VTEC solenoid, VTEC pressure switch and convert from a 1 wire to a 4 wire O2.
Yes, if you use the Si engine harness, the swap will be plug and play. ALL 92 Civic's (your CX included) are prewired for VTEC on the cabin harness side so by using a VTEC engine harness, there will be no additional wiring for the VTEC solenoid or pressure switch. Using your stock engine harness is also an option but you will need to add the wiring for the VTEC solenoid, VTEC pressure switch and convert from a 1 wire to a 4 wire O2.
ok let me get this straight, if i use my si wiring harness it will all plug right up to the harness's that are at the strut towers on each side? and if i use the si wiring harness i will not have to convert my o2 sensor, and there is no additional wiring,
thank you for all your help on my first vtec swap, ive done a few ls swaps but no vtec swaps at all, once again thanks you all for everything
thank you for all your help on my first vtec swap, ive done a few ls swaps but no vtec swaps at all, once again thanks you all for everything
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onefastcivic »</TD></TR><TR><TD CLASS="quote">ok let me get this straight, if i use my si wiring harness it will all plug right up to the harness's that are at the strut towers on each side? and if i use the si wiring harness i will not have to convert my o2 sensor, and there is no additional wiring,
</TD></TR></TABLE>
yes that would be correct.
</TD></TR></TABLE>
yes that would be correct.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




