Whether you drive your car to and from work or only drive a quarter mile at a time you will see remarkable benefits with our new diffuser design. At speed a rear bumper cover can increase overall aero drag and promote lift. Neither of these effects are desirable on any vehicle, and as speed increases the problem becomes more pronounced. Think of your rear bumper as a big air brake. Our diffuser removes the trapped air and lets it flow freely through the bumper cover. Our product promotes higher track speed and gives the driver more stability at those high speeds.

This product has been tested at the drag strip on a 9 second, 150mph drag Civic. The diffuser is water jet cut from our high quality Rigid RacePlate, and it has the same glossy finish everyone loves. It measures approximately 4"x44.5", and comes with easy to read instructions for trouble free install. For those really fast racers out there you will be happy to know we machined a center hole just for your parachute tube. A secondary benefit for some cars using parachutes is faster parachute deployment due to the larger volume of air exiting out the bumper cover.

*Will fit most late model import and domestic vehicles

 

Look good but can you cut out a different design like you lost, or your slow. AOA just reminds me of Audi of America.

 

how much? i feel like experimenting

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by underpressure02 &raquo;</TD></TR><TR><TD CLASS="quote">Look good but can you cut out a different design like you lost, or your slow. AOA just reminds me of Audi of America.</TD></TR></TABLE>

Yah we can have any lettering cut out of the rear diffuser panel for an extra charge.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx12 &raquo;</TD></TR><TR><TD CLASS="quote">

Yah we can have any lettering cut out of the rear diffuser panel for an extra charge.</TD></TR></TABLE>

How much more.....kinda curious myself
thanks

 

much nicer than the bling polished ones

 

I have gotten a CF sheet from adam, THUMBS up
Good service.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MY_EL_1 &raquo;</TD></TR><TR><TD CLASS="quote">I have gotten a CF sheet from adam, THUMBS up
Good service. </TD></TR></TABLE>

Thanks Nick

The custom cutting is $75 for anything that will fit.

 

Here is it installed on the car.

 

any other CF items available?

anything for accord?

 

We are making a two piece design that would work for the Accord.

 

.. whats up with the cut outs.. looks like a 9 year old did it.. not very clean looking.

 

from the rear the cut outs look ok, but because of the varing thickness of the carbon fiber, from the sides the cut outs look jagged

 

pm'md

 

available for eg6?