As topic states.... ppl w/ B16 turbo setups post a pic of your dyno w/ info on the turbo you used...

Also what is your high/low boost settings.

Thx

 

https://honda-tech.com/zerothread?id=311514
ALL INFO IN THIS POST

 

i want 500whp

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DLB1994 &raquo;</TD></TR><TR><TD CLASS="quote">i want 500whp </TD></TR></TABLE>

me 2!!!!!!!!!

 

Hey Boostfed, I was noticing your quote under your user name. What xactly is a "Kimchee wiggler"? My mom makes that stuff all the time, but I don't know what the wiggle part means.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LiLOtaku &raquo;</TD></TR><TR><TD CLASS="quote">Hey Boostfed, I was noticing your quote under your user name. What xactly is a "Kimchee wiggler"? My mom makes that stuff all the time, but I don't know what the wiggle part means. </TD></TR></TABLE>
It's an inside joke from when I was in the Army.

 

for a min i thought i saw "Kimchee Wigger" lol!
sorry, its been a late nite

Edit: wait a min, that'll be a great screen name

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quick 200k Mile Motor &raquo;</TD></TR><TR><TD CLASS="quote">for a min i thought i saw "Kimchee Wigger" lol!
sorry, its been a late nite</TD></TR></TABLE>
That would be kinda funnt since my wife is black, but i don't think i am a wigger and neither does she.

 

Sweet #'s boostfed, but does anyone have any with a 81 or 81.5mm bore?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackANESE &raquo;</TD></TR><TR><TD CLASS="quote">Sweet #'s boostfed, but does anyone have any with a 81 or 81.5mm bore?</TD></TR></TABLE>
I made stock motor untuned DRAG 3 kit 243whp and 176ft-lb torque 9psi through the exhaust. Then built motor 81.5mm Endyn pistons and Eagle rods made 370whp and 273ft-lb torque 21psi same small *** turbo. People are making much more impressive numbers now with these bigger turbos. I made on my last set up 370whp with only 14psi FYI

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed &raquo;</TD></TR><TR><TD CLASS="quote">
I made stock motor untuned DRAG 3 kit 243whp and 176ft-lb torque 9psi through the exhaust. Then built motor 81.5mm Endyn pistons and Eagle rods made 370whp and 273ft-lb torque 21psi same small *** turbo. People are making much more impressive numbers now with these bigger turbos. I made on my last set up 370whp with only 14psi FYI</TD></TR></TABLE>

Nice... I know there are my B16 turbo setups here.. post those sheets.

 

After 7250 rppm the torque starts dropping off, is that because turbo is running out of breath and pressure is dropping?

 

My car was SICK SICK SICK when we dyno'd it. Smoke everywhere on the dyno, but the a/f was right on, and the car was acting ok, so we ignored the smoke and kept tuning. Also, we found that it had a .50 a/r compressor, 46 trim and a .48 turbine housing. TINY little hybrid turbo.

Most of the important stuff is here:
https://honda-tech.com/zerothread?id=311595

Here's the dyno: Right Click/Paste for slightly larger version