help ive been trying to loosen the tie rod locknut so i can adjust the toe,
but that dam thing wont budge
ne one else have this problem
ne advice would be very helpful, thanks

 

breaker bar.

 

is that how u loosened it

 

yes. and elbow grease. I have a section of steel pipe i use as a cheater/breaker.

 

how big of a pipe u use

 

my pipe is really big

 

how high r u jacking up the car, cause i was just using the stock jack, so all i could get in there was athe freakin wrench

 

don't flatter yourself. i'm sure katie calls you "little ry ry" for a reason.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by REDMAN1322 &raquo;</TD></TR><TR><TD CLASS="quote">how high r u jacking up the car, cause i was just using the stock jack, so all i could get in there was athe freakin wrench
</TD></TR></TABLE>

Invest in one of these
http://www.harborfreight.com/c...47246

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JMU1337 &raquo;</TD></TR><TR><TD CLASS="quote">don't flatter yourself. i'm sure katie calls you "little ry ry" for a reason.</TD></TR></TABLE>
0wn3d

(just like this thread)

 

k thaNKS

 

Breaker bar, as has been said, and whack it (the breaker bar) with a big-*** hammer a few times. Also soak in in WD-40/PB Blaster/your lubricant of choice for a little while, see if that helps.

 

19mm and 22mm open-ends and a hammer to break the 22mm nut loose.