Did a search and came up with nothing. Anybody have printed instructions on how to put it on? Seems easy enough but I want to make sure I put it on properly. Thanks.

 

damn i think i've answered this question a milliontimes.. haha.. but here goes...

GO TO THE DEALER AND ASK FOR A PRINT OUT.

ok... now that we covered what you should have done... i'll stop being a jackass and help ya out. haha..

-There should have been some metal clips with nuts welded to them, those clip onto preexisting slots on teh bottom of your front bumper, when you line up the lip to the bumper, and look underneathe, you'll see where i'm talkin about. Slide those clips in, then bolt up the lip thru those nuts.
-hold up the lip to the front bumper in the position it should be mounted in, and if you look in the fender area, you see there are two holes in the lip, one that goes thru an existin hole in that area, and one that doesn't have a hole. Use the included self-tapping screw to make a new hole and mount it.
-Once you have these in, then you can look underneath the lip, where you will see a metal mounting bracket (one on either side) with a small hole/slit on it, drill a hole in this position and mount with the supplied hardware.

I thinkthat about covers it. Hope that helps buddy.

 

thanks for the info! i appreciate it.

 

anyone know the part numbers for allthe bolts and everything? I just bought a ITR lip and it had zero nuts or bolts or anything. Thanks

 

if you really can't figure it out, you can do what I "did", bolt on the 2 bolts in the wheel well, and use Heavy duty Velco around. As funny as this sound, it work semi well. it won't come off, but it might not look as low as it can be. Also it can scratch your bumper...

 

LOL..theres little hole things if u look at the bottom of the bumper where it goes, my friend did his in 15 minutes, haha....

 

VERY Easy. I install my whole kit in 45 minutes.

10 minutes for the Front Lip
10 minutes for the Side Skirts
25 minutes for the Rear Dress


It's pretty self-explanatory if you look under your car and the Lip.

 

**** all i put on was the two stock bolts in the wheel well. and mine is sitting fine. but im going to put the other bolts on eventually i just dont have a jack right now to get my car up.

 

That is all I have on right now too, and it seems to be doing alright, but I definately want to put at least 2 more in on the bottom. I really LOVE the look of my car w/ the lip installed!

 

i used bolts and washers for mine....