Head work (milling) and cam timing
#1
New User
Thread Starter
Join Date: Jun 2001
Location: At arms length....
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Head work (milling) and cam timing
Ok folks!
I need to get the final verdict on a technical issue. I am in the process of having my C5 head reworked and part of the work includes milling the head.
The question is this... to correct for the milling how do I adjust cam timing. I am under the impression that 10 thou of milling is equal to 1 degree of retard on the cams.
Is this correct?
TIA
Nash
I need to get the final verdict on a technical issue. I am in the process of having my C5 head reworked and part of the work includes milling the head.
The question is this... to correct for the milling how do I adjust cam timing. I am under the impression that 10 thou of milling is equal to 1 degree of retard on the cams.
Is this correct?
TIA
Nash
#2
Darth ModerVader
Thread
Thread Starter
Forum
Replies
Last Post
JDMs1eeper
All Motor / Naturally Aspirated
18
08-24-2003 12:01 AM