will any d motors pistons and rods work in a d16a6 block with a z6 head

 

come one guys

 

Yes, just make sure you find a D-series rod thats from the same liter size engine and the same stroke...

 

any 75mm bore size piston will fit.

 

yup any 75mm will work. But the concern should be about what compression you will have in the end result.

get the D16a1(89 teg) i think. they work fine and will give you like a 11:1.8 CR

some one correct me if I'm wrong

 

yeah the a1 pistons from the integra do raise compression

 

yup, teg piston on stock civic rods