What CC are Stock B20 injectors? 210cc? Can I keep them for a B20vtec swap?

 

240cc

 

Is 240cc good enough to keep for a B20vtec swap?

 

go to rc engineerings web site http://www.rceng.com

everything you need to know about injectors.

 

I see that you have a B20 swap, what injectors are you using?

 

240cc b18b injectors.. the ones from my b20 were dirty... running 46 psi

if you were to run a b20 vtec you would prolly want 45 psi on 240's with a good amount of fuel added up top.. this might max out your stockers.. try 270 or 310 cc... this will allow you to run nice and low fuel pressures


[Modified by JCushing, 6:59 PM 10/24/2002]

 

Is there a way to clean the injectors to new condition? I want 310cc RC injectors but can't afford them at the moment.

 

you can get them balanced and blueprinted.. this makes them just like new... rc engineering does this for 100 bux a set i belive...

 

Thanks, you've been great help. Would you happen to know if the B20 injectors will fit into my 98 D16Y8?

 

dont know try it...

 

sorry, it just reads better...

t..

 

I think b and d series injectors flow the same, 235-240cc, just to let you know if you're just swapping them. I've used d-series injectors in a b-series motor and it worked fine, so they will probably fit the other way around.

Brad

 

Does anyone know what size are the D-series injectors? 185cc?

 

240 cc I'm positive about this now.

 

Same as B20 injectors?? Damn, no use replacing them then.