My GT3076R didn't come with a fitting on the compressor housing for boost pressure.

Has anyone ran the ATP Quick Tap?

http://www.atpturbo.com/Mercha...-FTG1

I'm wondering if it will actually hold up to high boost levels (15-25)? Doesn't this technically weaken the coupler? I was thinking about putting this into my 90 degree transition coming off of the compressor but with all of the flex that the coupler is going to do, will this hold pressure? I'd like to hear experiences!

 

why not drill and tap the housing?

 

you dont have to tap the compressor housing.. It will work fine getting your wastegate vac source from a vacume manifold or the intake manifold (depending on the setup). I ran mine from my IM and it was fine, (edelbrock)

 

its much cleaner when u dont have a zillion hoses running off the manifold or vacume box

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .CUBISH. &raquo;</TD></TR><TR><TD CLASS="quote">why not drill and tap the housing?</TD></TR></TABLE>

That's still an option. I didn't ask if I should tap the housing or use this. I was just curious if anyone has used this and if it works.

 

im using that quick tap........works perfectly fine.....i have mine tapped right before the throttle body

 

Never seen this before, some would rather not drill and tap there turbo, but wouldnt mind cutting a $5 coupler. Looks like it would work fine.id probally cover the nut on the outside in rtv.

 

have not had any issue with that so far been running it for 2 years