so it started out at work being bored, so i decided to install my brothers door visors here is a little step by step on how to install.

i had some people ask me to do this, so sorry if there is already a write up, but it was confusing to some! hope it helps

TOOLS: flat head pocket screwdriver,phillips head screw driver,hands, thumb

STEP 1
<U>roll the window all the way down by pressing the down button if you have power/ roll down if you have manual, it will look like so.</U>




STEP2
<U>i stick a screwdriver in between the 2 rubber piece's and pull out with my hands like so.</U>


<U>it will then look like this</U>


STEP 3
<U>remove the rear rubber piece as well to find the location of where the 2 screw in clips go! one at the rear of the door and one towards the front.</U>

front


STEP 3
<U>install the screw clips into the door with there openings</U>




STEP 4
<U>re-instal that top rubber molding into its place by pressing it with your thumb.</U>


STEP 5
<U>you should now have the top molding back into place and the top and front door brackets in place, now you can mock it up to see where others go like so</U>

<U>kind of mark the spots with your finger's and move them around till its as close as you get it.</U>



STEP 6
<U>re-install the lower rubber molding back into place over all 5 brackets.
using your thumb press it up and back so it seat's back into its track</U>


STEP 7
<U>now you can start installing the clips, 3 of the clips just snap right in. the front and rear are diff. but you just simply put it in the whole</U>

<U>then you push the bracket up and snap in the clip</U>


STEP 8
<U>this is the hardest part, getting the front and back ones in. you have 2 washers for each side. well you take the clip apart and sit the top piece aside, then you grab that little washer and put it behind the bracket. you now push that piece of the clip threw the bracket and washer and quickly press the top piece of the clip threw so it seats threw the washer.</U>



STEP 9
<U>clean up your mess and look at what you did!</U>


only takes about 30 min for both side's.. if you have any trouble feel free to ask, or if this isnt help full make fun of me

 

SweeT!

 

Nice

 

you and your brothers car look clean...props to both of you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR Mark &raquo;</TD></TR><TR><TD CLASS="quote">you and your brothers car look clean...props to both of you</TD></TR></TABLE>

lol thanks, hope this helps alot of people out

 

visors are one of the best investments ive ever made...

for fresh air while driving in the rain

 

Niice.

 

awesome details and coverage

 

good thread

 

I don't care about the write up... better pics of the car.

 

Step 1 FTW.

 

what about ek 4dr civic, how to you install them?

 

Nice lookin visors. Too spendy for me.

 

 

on the bracket there is different letter which letter goes where on the door

 

now do you think this is the same for DC's?..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I got a honda &raquo;</TD></TR><TR><TD CLASS="quote">now do you think this is the same for DC's?..</TD></TR></TABLE>

nah i already have the visors on my DC i jus wanted to check it out since im installing these for my boy on his coupe tom. n jus wanted to see if there were mounted the same

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMFreak_DC2 &raquo;</TD></TR><TR><TD CLASS="quote">

nah i already have the visors on my DC i jus wanted to check it out since im installing these for my boy on his coupe tom. n jus wanted to see if there were mounted the same </TD></TR></TABLE>

so this wouldn't help me to install em on my DC?..its totally different?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I got a honda &raquo;</TD></TR><TR><TD CLASS="quote">

so this wouldn't help me to install em on my DC?..its totally different?</TD></TR></TABLE>

nah its a lil diff for DC's here this may help u out
https://honda-tech.com/zerothread?id=1549788

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMFreak_DC2 &raquo;</TD></TR><TR><TD CLASS="quote">

nah its a lil diff for DC's here this may help u out
https://honda-tech.com/zerothread?id=1549788</TD></TR></TABLE>

sweet thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I got a honda &raquo;</TD></TR><TR><TD CLASS="quote">

sweet thanks!</TD></TR></TABLE>

 

just wanted to say thanks man.
sittin at work bored and im printin this out in case anything comes up.

gonna install my visors on my daily ek tonight.

 

more pics of the beautiful coupe?