i want to kno how to install a tach on my coupe with ls swap step by step instructions would be greatly appreciated. thanx

 

I definitely know that this can be found from searching in the archives...

 

i just want to kno what wires go where. ive tried searching but nothing if someone can tell me what wires go where. thanx

 

i have an autometer sportcomp

 

The blue wire on the dizzy and power and ground ..

 

I think t-i had a article on it. But, I can't seem to find it right now.

 

The only wires that you'll have to hook up are:

1.) ignition power source
2.) ground
3.) illumination wire (if there is a backlight)
4.) tach signal wire (found either at the ECU or at the distributor. I believe it is green).

If I locate the exact position of the tach signal, I'll post it. All the other wires can be tapped into at the fuse panel under the dash.

 

Easy spot to tap for illumination

Use this article for installing a shift light to guide you through the process for installing your tach

 

If you look at the driverside firewall in the engine bay you'll see a plug that is there that isnt plugged into anything. Thats one of the tach signal wires. I used that one. You have to clip both loops on the tach as well I believe. The rest is just ignition, ground, and illumination (you can tap into your parking lamp for this)

 

thanx for the responses very helpful lets hope i dont blow nothing up