Blower Motor Only Works On Setting 3 & 4?
My blower just suddenly started behaving like this -
OFF - OFF
1 - OFF
2 - OFF
3 - 3
4 - 4
The first two settings do nothing at all, and the 3rd and 4th work as normal. Am I correct in assuming that I need to replace number 5 in the parts diagram?

Part Number - 79330-SH3-003
Item - RESISTOR, BLOWER
Price - 22.26
REFERENCE https://honda-tech.com/zerothread?id=725462
OFF - OFF
1 - OFF
2 - OFF
3 - 3
4 - 4
The first two settings do nothing at all, and the 3rd and 4th work as normal. Am I correct in assuming that I need to replace number 5 in the parts diagram?

Part Number - 79330-SH3-003
Item - RESISTOR, BLOWER
Price - 22.26
REFERENCE https://honda-tech.com/zerothread?id=725462
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16-CRX »</TD></TR><TR><TD CLASS="quote">Yea, thats the blower motor resistor. Most likely your problem.</TD></TR></TABLE>yep, that's it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_soy »</TD></TR><TR><TD CLASS="quote"> same thing happend to me, still only 3 and 4</TD></TR></TABLE> Do you mean you replaced the Resistor and settings 1 and 2 still didn't work?
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_soy »</TD></TR><TR><TD CLASS="quote">I just never got around to changing the resistors
</TD></TR></TABLE>I probably wouldn't bother fixing it either.
</TD></TR></TABLE>I probably wouldn't bother fixing it either.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ILcrxsi1 »</TD></TR><TR><TD CLASS="quote">I probably wouldn't bother fixing it either.
</TD></TR></TABLE> Well I am going to bother fixing it because sometimes I just want a wee bit of heat, not a massive blast of Saharan air. And I can't stand things not working the way they are supposed to
</TD></TR></TABLE> Well I am going to bother fixing it because sometimes I just want a wee bit of heat, not a massive blast of Saharan air. And I can't stand things not working the way they are supposed to
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dr_latino999 »</TD></TR><TR><TD CLASS="quote"> Well I am going to bother fixing it because sometimes I just want a wee bit of heat, not a massive blast of Saharan air. And I can't stand things not working the way they are supposed to
</TD></TR></TABLE>tell me about it. in the fall I take the center console apart and pull the wires to heat and in the spring I do it again and set it to cold.
</TD></TR></TABLE>tell me about it. in the fall I take the center console apart and pull the wires to heat and in the spring I do it again and set it to cold.
You may be able to luck out and get one as a pocket score from a junkyard. If you're pulling used ones, just compare your bad one to them, you'll see which ones are good very easily. Otherwise I think they're ~$25 from Majestic. Or if you're patient, I put a WTB for one in my sig and got one from a member here after three weeks or so.
Thread
Thread Starter
Forum
Replies
Last Post



This is another reason why my car will never be fast, I spend all my money on fixing little things

