I have a 97 civic ex. The guy is selling a GSR rear swaybar with the endlinks. What else do i need to put it on, and from what car? Will I be able to use the gsr endlinks? Also do my stock rear lca's accept the bar? Will I have to do modifications for it to clear my stock exhaust?

 

your stock lca's will work fine if they have the hole already in them from the factory. I had to drill out my passenger side LCA to install my sway bar for some reason, but the driver side did not have to be drilled. You will need a beaks kit and probably the 99-00 si endlinks

 

You will need:

52317-S04-000 BRACKET, RR. STABILIZER (QTY: 2)
52321-S04-003 LINK ASSY., L. RR. STABILIZER (QTY: 1)
52320-S04-003 LINK ASSY., R. RR. STABILIZER (QTY: 1)
52315-SR3-000 BUSH, RR. STABILIZER (QTY: 2)
52308-S04-000 HOLDER, RR. STABILIZER (QTY: 2)
95701-08018-08 BOLT, FLANGE (8X18) (QTY: 4)
93403-08020-08 BOLT-WASHER (8X20) (QTY: 4)
90212-SA5-003 NUT, SELF-LOCK (10MM) (QTY: 2)
90002-S10-000 NUT, FLANGE (10MM) (QTY: 2)

You can use your stock LCAs

 

So I wont have to drill holes in my lca's?

 

I've seen hatchbcks have holes for the endlink already, I am sure your EX does too. Just look underneath the rear of your car and look for the hole.

 

I read somewhere that the guy had to modify some parts to clear his exhaust, case that bar would have went straight through it.... is that true

 

If stock exhausts were bent similarly (between GSR/Si), and the sway bars designed similarly (between GSR/Si), you shouldn't have problems with OEM parts on your car.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">You will need:

52317-S04-000 BRACKET, RR. STABILIZER (QTY: 2)
52321-S04-003 LINK ASSY., L. RR. STABILIZER (QTY: 1)
52320-S04-003 LINK ASSY., R. RR. STABILIZER (QTY: 1)
52315-SR3-000 BUSH, RR. STABILIZER (QTY: 2)
52308-S04-000 HOLDER, RR. STABILIZER (QTY: 2)
95701-08018-08 BOLT, FLANGE (8X18) (QTY: 4)
93403-08020-08 BOLT-WASHER (8X20) (QTY: 4)
90212-SA5-003 NUT, SELF-LOCK (10MM) (QTY: 2)
90002-S10-000 NUT, FLANGE (10MM) (QTY: 2)

You can use your stock LCAs</TD></TR></TABLE>

how much will all that stuff cost me, and can i get it at the local napa's? Also anyone have a diagram with the swaybar and how it bolts on?

 

Price everything out at http://www.barancoacuraparts.com and http://www.slhondaparts.com

 

k got some more questions. What should I torque all the bolts to?

 

so will i be able to use the gsr endlinks?

 

that ***** way to complicated damnnnnn

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turnsignalandy &raquo;</TD></TR><TR><TD CLASS="quote">so will i be able to use the gsr endlinks?</TD></TR></TABLE>

Nope

 

expletive me. I just got the bar, it comes with the bar, enlinks with nuts and bolts.... bushings (29 on diagram) and the D bracket around the bushings. What else do I need? Where can i get some si endlinks? Can i get the nuts and bolts to mount the d brackets from a home depot store?

 

Also can i atleast use the nuts and bolts from the gsr endlinks?

 

SOB am i screwed? Lookin around in the internet and the cheapest si endlinks i found were for 30 a piece!! I pain 50 of for the swaybar........ anyone know where i could get some cheap endlinks?