went to the track again tonight, this time on slicks for the first time... i used my friends 22'' MT slicks and did nothing but spin them.. Here is my best run of the night...

R/T..... .642
60...... 1.882
330.... 5.429
1/8..... 8.339
MPH.... 84.91
1000... 10.850
1/4..... 12.9
MPH.... 108.49

 

slicks and nothing but spinning?

apirl fools?

nice time

 

track prep sucked + slicks were alittle bit to small

 

Impressive times none the less.

 

22inch slicks dont cut it. I used to spin those all motor.
deff nice times though.
try some 225x60x15 BFG's they will hook much better. Or some 24.5 MT's

 

Thanks guys

i'm going to get some 24.5 MT's for next time and hope for some low 12 sec runs

 

very nice time!!!!

 

what kind of pressure did you use? You may want to try less, maybe around 12psi? were these the 8"ers on stock wheels?

24.5" comes in 15? m&h??


Nice job!

 

awesome

slicks on the stock wheels? m&h makes 15s, but not sure if they fit the stock wheels or not.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by apexii &raquo;</TD></TR><TR><TD CLASS="quote">what kind of pressure did you use? You may want to try less, maybe around 12psi? were these the 8"ers on stock wheels?

24.5" comes in 15? m&h??


Nice job! </TD></TR></TABLE>

thanks again....

tire pressure was 16psi.. also they were the 8''ers.... MT just came out with the 24.5 15's not to long ago from what i hear

 

Reaction Time and 60 foot time are still pretty good, considering you ran a 22 inch slick and spun. Great run!

The trap indicates that mid to low 12's are possible.

The beauty of the ITR, is that instead of running out of steam, at the 1/4 mile mark it's only just begining to stretch its legs.

 

that 60' is beautiful, thats stock EVO/STI territory. I know some people that can hit 1.6's but 1.8 FWD is nicey.

anyone know if these fit the stock wheel? I tried to compare to the stock 010 potenza dimensions and azenis, not toooo far off...

http://www.mandhtires.com/stor...etail

 

good time. that at rockingham today? you should try the 22's again if you cant get the 24.5s. Drop your cold psi to 10 or so. Even with you spinning the slicks, they still hook better than street tires. 1.88 is a good 60' for being on slicks for the first time. A little more practice and youll get it down. I was pulling 1.75s on 20" and 22" with an open diff with a little practice. reason i say practice is the 24.5s may be a little tall for your power. good luck btw was there a good turn out today? Did RLZs hatch run?

 

Keith-

Matt said you were hitting the track soon, more rubber will surely get those times down.


Nice 60ft btw

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DAPek9 &raquo;</TD></TR><TR><TD CLASS="quote">good time. that at rockingham today? you should try the 22's again if you cant get the 24.5s. Drop your cold psi to 10 or so. Even with you spinning the slicks, they still hook better than street tires. 1.88 is a good 60' for being on slicks for the first time. A little more practice and youll get it down. I was pulling 1.75s on 20" and 22" with an open diff with a little practice. reason i say practice is the 24.5s may be a little tall for your power. good luck btw was there a good turn out today? Did RLZs hatch run?</TD></TR></TABLE>


i went to the rock sat night for TEST N TUNE...

thanks for the tips

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CXr &raquo;</TD></TR><TR><TD CLASS="quote">Keith-

Matt said you were hitting the track soon, more rubber will surely get those times down.


Nice 60ft btw

</TD></TR></TABLE>

thanks

PM me a price on some MT 24.5's please....