I was wondering if a 99-00 civic si bumper would fit a 98 civic hx or would there have to be some moddification such as headlights and fenders and so on, i really want this bumper because of the fog lights that go in it.

 

you have to use the whole front end i think ie: hood, headlight, bumper. i am not 100% but i think fenders maybe. if you were planning on buying a carbon hood justify it by buying the 99-00 one

 

search!

headlights, hood, bumper cover, fenders, and grill...

 

you must replace the front bumper, fenders, grill, headlights, & hood.. & if you want a perfect swap, the radiator support.

 

the 99-00 bumper wont line up with the 96-98 hood. the bumper will fit but you will see a big gap between the fender and hood and mayble

 

exactly what LyghtFunky1 said!

 

kool thanx for all the help guys!

btw i found a whole conversion kit on passwordjdm.com

 

well i dont have the money to spend on the conversion so i was wondering if anyone knew if there was a bumper like the si type that have the vents in it because i have seen countless civics around here that has them and i know for a fact there not all si's

 

You could just get the c-west one, that should be close enough. No fogs for you there though.

 

Enough with this god damn question this has to be the most covered thing on honda-tech... and is asked about 100 times a week

 

Hey I only ask a simple ******* question you dont have to be an such an ******* about it, and if you have seen this question so damn much then you didn't even have to click on the damn topic you fucktard!!!!!!!!!!!!

 

i have a 96 EX and i bought a SI front bumper, fenders, and i have a carbon fiber hood. the hood i bought said it would fit any civic from 96-00 so i assumed that it would fit with SI fenders bumper and hood... and it did... the i then added a CTR lip on it and it looked sick. i have pictures if you want so email me

optionrydr99@hotmail.com

best bet is to go to cragslist.com and find your area and look for peice by peice.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type R 00 &raquo;</TD></TR><TR><TD CLASS="quote"> look for peice by peice.</TD></TR></TABLE>

Exactly what I did. I also had to modify the bumper slightly to fit properly with the 96 radiator support.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18c-ivic_gsR &raquo;</TD></TR><TR><TD CLASS="quote">Hey I only ask a simple ******* question you dont have to be an such an ******* about it, and if you have seen this question so damn much then you didn't even have to click on the damn topic you fucktard!!!!!!!!!!!!</TD></TR></TABLE>

I'm just trying to get the message across, that if you search you will find....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G2 Speed &raquo;</TD></TR><TR><TD CLASS="quote">

I'm just trying to get the message across, that if you search you will find....</TD></TR></TABLE>

 

Hope this helps:

https://honda-tech.com/zerothread?id=790135