Has anyone modified a set of s2000 seats to fit in an EK?

 

yes

 

Yeah... There are three the line up with each other. The two front ones you have to bend. What I did was 1) Take the rails off the seats, 2) bolt up the two front screws so that the two other rear rails are in the air, 3) Push the rear rails down so that the rails would be bend into shape, 4) do the same steps for both the driver side and passenger side, 5) take the rails off and now you have your bent rails, 6) now put the rails back on the seat and throw the seats in. I dont have any pics on the how-to but I got pics of the seats in my car......

 

^^^^^^^^^^^^ nice!

 

Yikes that sounds ghetto

You can also swap out the seat pans, they are interchangeable between seats, so you can use the Ek brackets

 

i want a set!!

 

https://honda-tech.com/zerothread?id=1479028

^theres the seat pan swap method. But that bending the rails method sounds a lot easier.

 

i have them in my EK also

 

i have them in my ek also

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^Jae &raquo;</TD></TR><TR><TD CLASS="quote">Yikes that sounds ghetto

You can also swap out the seat pans, they are interchangeable between seats, so you can use the Ek brackets</TD></TR></TABLE>
right on

 

i have em in my eg, even tho i only have 2 bolts in, 1 in front, 1 in back, its sturdy as hell.. i might try bending the other front one in place. we'll see.

 

So you're bending the s2k rails in place?

How much lower is the seating position, compared to stock?