AEM EMS Dynoed!!!!!
#1
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
AEM EMS Dynoed!!!!!
Last night we were tuning my buddy's car with the new AEM EMS System and we got 371 hp & 352 ft/lb @ 7 psi!
We ended up blowing the motor though on our last run. We didn't go lean at all. The A/F was under 12.5:1 throughout the dyno run. I beleive we found the week link in the stock sleeves. We are pulling the motor tonight to see what the problem is. I am 90% positive that the sleev is what gave out. I have a hard time beleiving that the Cometic Metal Headgasket gave out. The other 10% possibility can be that the headstuds weren't torqued down tight enough, but I have a hard time seeing that as the problem. The only thing we swapped out from the car's 279 whp @ 7psi dyno was the AEM EMS, T3 .82 A/R Turbine Hosuing, & 550cc injectors. We were tuning the car for IDRC here in Arizona this weekend. I think we may throw a stock 99 Civic Si B16A in the car just to run this weekend!
You can the see the turbo setup @ http://www.b18bomber.freeservers.com/b18bomber.html
We ended up blowing the motor though on our last run. We didn't go lean at all. The A/F was under 12.5:1 throughout the dyno run. I beleive we found the week link in the stock sleeves. We are pulling the motor tonight to see what the problem is. I am 90% positive that the sleev is what gave out. I have a hard time beleiving that the Cometic Metal Headgasket gave out. The other 10% possibility can be that the headstuds weren't torqued down tight enough, but I have a hard time seeing that as the problem. The only thing we swapped out from the car's 279 whp @ 7psi dyno was the AEM EMS, T3 .82 A/R Turbine Hosuing, & 550cc injectors. We were tuning the car for IDRC here in Arizona this weekend. I think we may throw a stock 99 Civic Si B16A in the car just to run this weekend!
You can the see the turbo setup @ http://www.b18bomber.freeservers.com/b18bomber.html
#3
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (VaporTrail)
nice.
So you were running stock head bolts? What are the chances you stretched them, causing the head to lift?
So you were running stock head bolts? What are the chances you stretched them, causing the head to lift?
#5
Honda-Tech Member
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (dlplayboy)
thats alot of hp for the stock sleeves and studs to endure
remember this car has been rode hard,put away wet ! but nice work proves the AEM is highly capable and all the Max-Rev non-beileivers can shut the f@$# up now
blew your motor off 7lbs on a standalone unit? daym...
#6
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (lucas569)
thats alot of hp for the stock sleeves and studs to endureblew your motor off 7lbs on a standalone unit?
The only things changed was:
.82 A/R Turbine Housing
550cc Injectors
AEM EMS
The .82 A/R Housing had *A LOT* do do with the amount of power it produced at such low boost levels. The AEM EMS let us tune the car where it was under 12.5:1 on the sniffer! It was sick on the dyno! We should be able to make 450-500 whp with a sleeved block and 15-18 psi! We will have to get some larger 720cc injectors but at least I know we can tune the car to make some power with the AEM EMS!
#7
Re: AEM EMS Dynoed!!!!! (APEXSER)
What type of rpm shift in spool-up time did the .82 housing cause?
Oh, and GREAT numbers!!! That torque value is sick
[Modified by DSF, 1:33 PM 3/14/2002]
Oh, and GREAT numbers!!! That torque value is sick
[Modified by DSF, 1:33 PM 3/14/2002]
Trending Topics
#9
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (DSF)
What type of rpm shift in spool-up time did the .82 housing cause?
Oh, and GREAT numbers!!! That torque value is sick
[Modified by DSF, 1:33 PM 3/14/2002]
Oh, and GREAT numbers!!! That torque value is sick
[Modified by DSF, 1:33 PM 3/14/2002]
Thanks!
#10
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (Arturbo)
Even with a good air to fuel ratio, it is still possible to have detonation.
art
art
#14
New User
Join Date: Feb 2001
Location: san luis obispo, ca
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (VTC_CiViC)
That is just sick. I can't BELIEVE you can make that kind of torque on 7 psi. That is TWICE the peak torque I had on my last dyno (B18C, 7 psi).
#16
Honda-Tech Member
Re: AEM EMS Dynoed!!!!! (Quaalude)
god damn
375p@7psi?
im comming up to phoenix to dyno when i get my turbo in with hondata/aem
Joe (who HATES every import shop here in tucson)
375p@7psi?
im comming up to phoenix to dyno when i get my turbo in with hondata/aem
Joe (who HATES every import shop here in tucson)
#17
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (VTC_CiViC)
This was on a B18B correct? For a minute I thought it was a B16A and I nearly fainted... 350lb/ft on a B16 at 7psi
The block was punched for 81.5mm JE 9.0:1 CR Pistons and has Eagle Rods w/ a Nuformz Blockguard. Stock sleeves!
#19
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (dbman96)
That is just sick. I can't BELIEVE you can make that kind of torque on 7 psi. That is TWICE the peak torque I had on my last dyno (B18C, 7 psi).
#21
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (dustin)
That's a big turbine housing man. Heh. Those are crazy numbers.
The .82 A/R housing was swapped out last week since I knew it could hit 10's with it on the old setup. We were so close to 10's with the .63 A/R housing that I had to try it. Then AEM had their seminar a week or so ago and we decided we needed to try it on a car. The .82 A/R housing is what I prefer to use on most drag cars! I preach and swear by the .82 housing non stop! It made the power and proved my point that it cn make power.
We are sending the block out to be sleeved next week and go back to the dyno with the new motor. I am shooting for 450-500 whp with some 720 cc injectors.
This is still a daily driven car!
#22
Honda-Tech Member
Join Date: Nov 2001
Location: pa, usa
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (APEXSER)
im amazed at those #'s. this guy drives this car on the street?? i noticed he is running 1000 lb springs in the rear and a stripped interior and that .82 a/r turbine, it must be annoying to drive on the street , but i guess if you are making that much power,it doesnt matter how annoying it is,its fast.
[Modified by internet ay, 3:57 PM 3/14/2002]
[Modified by internet ay, 3:57 PM 3/14/2002]
[Modified by internet ay, 3:57 PM 3/14/2002]
[Modified by internet ay, 3:57 PM 3/14/2002]
#23
Honda-Tech Member
Join Date: Jan 2000
Location: Sacramento, CA
Posts: 14,500
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (internet ay)
it must be annoying to drive on the street , but i guess if you are making that much power,it doesnt matter how annoying it is,its fast.
#24
Member
Thread Starter
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (internet ay)
im amazed at those #'s. this guy drives this car on the street?? i noticed he is running 1000 lb springs in the rear and a stripped interior and that .82 a/r turbine, it must be annoying to drive on the street , but i guess if you are making that much power,it doesnt matter how annoying it is,its fast.
#25
Honda-Tech Member
Join Date: Nov 2001
Location: pa, usa
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
Re: AEM EMS Dynoed!!!!! (dustin)
it must be annoying to drive on the street , but i guess if you are making that much power,it doesnt matter how annoying it is,its fast.
Shouldn't be significantly boosting a 10sec car on the street hehe.
Shouldn't be significantly boosting a 10sec car on the street hehe.