Hey Guys,

I really appreciate this. Can you go and push the arm towards the slave cylinder and see if you hear any swooshing or air at all?



I also need you to try and move it up and down (towards sky, towards ground) and see if it moves. You might need to push it harder to see. Mine moves. I'm not sure if it should. It looks like this (see if you can get yours to angle like this):

 

I went down and checked for you..and mine isnt the same kind.


lol good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN EK9 &raquo;</TD></TR><TR><TD CLASS="quote">I went down and checked for you..and mine isnt the same kind.</TD></TR></TABLE>What motor do you have?

 

mine doesnt budge at all

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Millenion LTD. &raquo;</TD></TR><TR><TD CLASS="quote">mine doesnt budge at all</TD></TR></TABLE>Up and down?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by litterbox &raquo;</TD></TR><TR><TD CLASS="quote">Up and down?</TD></TR></TABLE>


any direction

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Millenion LTD. &raquo;</TD></TR><TR><TD CLASS="quote">any direction</TD></TR></TABLE>Push really hard.

 

dumbass, WHAT motor and car do you have? More info man before I go check.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline96LX &raquo;</TD></TR><TR><TD CLASS="quote">dumbass, WHAT motor and car do you have? More info man before I go check.</TD></TR></TABLE>lol, yup, I realized this was the wrong forum after I posted. I'm used to posting here.

 

it only moves to the side and it make a slushy sound

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by litterbox &raquo;</TD></TR><TR><TD CLASS="quote">lol, yup, I realized this was the wrong forum after I posted. I'm used to posting here.</TD></TR></TABLE>

No doubt. Post in hybrids or EP3/DC3 forums moron! j/k

-Shane

 

Hey! That's a k20 slave cylinder

 

Actually, it's a K24 slave cylinder.

-Shane

 

You're not jealous, are you?

-Shane

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nighttrain33 &raquo;</TD></TR><TR><TD CLASS="quote">You're not jealous, are you?

-Shane</TD></TR></TABLE>

I know im not

 

Where's your dyno sheet? You have to admit, I like my B16, but would rather have a K24. Actually, my motor swap in the winter is going to be waaaay better. Litterbox knows what I'm talking about, but all lips are sealed.

-Shane

 

Man for the price im not If it was cheaper i wouldnt mine putting one in a drag car. I wouldnt mind racing him though

 

By the way litterbox, pics won't be on the way for a while. Not more than a week after we got done painting my car, some lady pulled out in front of me and sideswiped me in my car. Then, the insurance adjuster came out and popped my hood (to look at the headlight housing), and didn't latch the hood all the way. On my way to work, hood flew up and busted my windshield and screwed my hood. Hopefully I should be able to get it fixed this week.

It's all good though, since I will need to get a new hood for the next motor anyway, so, I was gonna get one sooner or later. I would have wanted later, but, oh well.

-Shane

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">Man for the price im not If it was cheaper i wouldnt mine putting one in a drag car. I wouldnt mind racing him though </TD></TR></TABLE>

By the way, if I wasn't going to do another swap in the winter, I would definitely buy your turbo kit off of you. I really wanted a Turbonetics, but it just won't work with the next motor. What one do you have on now?

-Shane

 

You post ******.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">I wouldnt mind racing him though </TD></TR></TABLE>Lemme get cams first.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nighttrain33 &raquo;</TD></TR><TR><TD CLASS="quote">Actually, it's a K24 slave cylinder.</TD></TR></TABLE>Actually it's a k20a2 slave cylinder.