I've been having problems with my ABS light for the past couple months. When I first bought my car (december 04) the ABS light was on non stop, but I replaced all the brake pads and all 4 rotors and it went way for a while.

Then a month or so later the light would randomly come back on sometimes. Sometimes it would stay on and when I would turn off my car and turn ti back on it would show up as soon as i started rolling.

After a few weeks of that It went away completely for about a month and now it comes on randomly. Sometimes when I accelerate pretty fast through several gears and reach a cruising speed of 60-70mph it will come on, but I wont experience any brake fading, vibrations, or anything odd. They function fine, aside from a squeek every now and then.


I dont understand whats goin on and i've searched for cell codes but didnt find anything. Its really starting to get annoying and i'd like to fix it. HOpefully someone can help me w/this. Anyone have any suggestions as to what it might be?

 

ANyone?...

 

same prob, im interested to see an answer too.

 

me too

 

* Main Code 1 - Pump Motor Over-Run. Pressure Switch.
* Main Code 1, Sub Code 2 - Pump Motor Circuit Problem. Motor Relay, Unit Fuse, Motor Fuse.
* Main Code 1, Sub Code 3 - High Pressure Leakage. Solenoid.
* Main Code 1, Sub Code 4 - Pressure Switch.
* Main Code 1, Sub Code 5 - Accumulator Gas Leakage.

* Main Code 2, Sub Code 1 - Parking Brake Switch Related Problem. Brake Fluid Level, Brake Light Switch.

* Main Code 3, Sub Code 1 - Right Front Pulsar.
* Main Code 3, Sub Code 2 - Left Front Pulsar.
* Main Code 3, Sub Code 4 - Right Rear, Left Rear Pulsar.

* Main Code 4, Sub Code 1 - Right Front Speed Sensor.
* Main Code 4, Sub Code 2 - Left Front Speed Sensor.
* Main Code 4, Sub Code 3 - Right Rear Speed Sensor.
* Main Code 4, Sub Code 4 - Left Rear Speed Sensor.

* Main Code 5 - Speed Sensors Left Rear, Right Rear. Modulator.
* Main Code 5, Sub Code 4 - Right Rear Speed Sensor. Modulator.
* Main Code 5, Sub Code 5 - Left Rear Speed Sensor. Modulator.

* Main Code 6 - Front or Rear Fail Safe Relay.
* Main Code 6, Sub Code 1 - Front Fail Safe Relay.
* Main Code 6, Sub Code 4 - Rear Fail Safe Relay.

* Main Code 7, Sub Code 1 - Solenoid Related Problem - Right Front or Fail Safe Relay.
* Main Code 7, Sub Code 2 - Solenoid Related Problem - Left Front or Fail Safe Relay.
* Main Code 7, Sub Code 4 - Solenoid Related Problem - Right Rear/Left Rear or Rear Fail Safe Relay.

After Ignition is turned on, ABS light will turn on for 1 second, then pause for 2 seconds before blinking first code. First code number indicates Main Code and second code number indicates sub code. light will pause for 5 seconds before showing next code/subcode combination. 3 Codes can be set at one time.

 

Thanks man, hopefully I can get this 'ish figured out. Where did u find these?

 

ahhh a magichian never tells his secrets but since im not one, I got it from http://www.hondahookup.com/manuals/ - 4th Gen manual in PDF.

 

Thanks again man

 

alright now its time for me to do a litle more search how to fix mine too sincei have the same problem!