Making carbon fiber parts?
Thread Starter
Member
Joined: Jan 2005
Posts: 1,454
Likes: 0
From: Terre Haute, IN
Making carbon fiber parts?
My hood is kind of dented up and i had to drill it for hood pins (no flaming, they were required to fit my intercooler). The holes are now rusting out, i figure i might as well make a carbon fiber one. I can fill my dents with bondo before taking a mold. Is the best way of taking a mold laying fiberglass over the hood, then making a copy of the hood from fiberglass from the mold and lay carbon cloth over the fiberglass copy?
What product do you suggest for a carbon resin?
What product do you suggest for a carbon resin?
Honda-Tech Member
Joined: Dec 2004
Posts: 1,269
Likes: 0
From: WA
Re: (ProjectStars*)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProjectStars* »</TD></TR><TR><TD CLASS="quote">im sorry I don't think thats possible. just buy a cf hood.</TD></TR></TABLE>
uh yeah it is but you need a giant vacuum bag system if you want it to turn out right
uh yeah it is but you need a giant vacuum bag system if you want it to turn out right
Thread Starter
Member
Joined: Jan 2005
Posts: 1,454
Likes: 0
From: Terre Haute, IN
Re: (c61lude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by c61lude »</TD></TR><TR><TD CLASS="quote">uh yeah it is but you need a giant vacuum bag system if you want it to turn out right </TD></TR></TABLE>
I'd simply need a large air tight bag and seal to a vacuum cleaner.
</TD></TR></TABLE>I'd simply need a large air tight bag and seal to a vacuum cleaner.
Honda-Tech Member
Joined: Dec 2004
Posts: 1,269
Likes: 0
From: WA
Re: (x O 16581 72452 5 x)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by x O 16581 72452 5 x »</TD></TR><TR><TD CLASS="quote">
I'd simply need a large air tight bag and seal to a vacuum cleaner.</TD></TR></TABLE>
yeah thats it
.. make sure you video tape it and post up your results
I'd simply need a large air tight bag and seal to a vacuum cleaner.</TD></TR></TABLE>
yeah thats it
.. make sure you video tape it and post up your results
Trending Topics
Honda-Tech Member
Joined: Oct 2004
Posts: 2,907
Likes: 0
post in welding\fabrication, those guys know what they are talking about when making cf parts
id reccomend starting smaller, like a radio block off plate out of cf, then move your way up to a hood eventually
id reccomend starting smaller, like a radio block off plate out of cf, then move your way up to a hood eventually
Honda-Tech Member
Joined: Oct 2003
Posts: 12,393
Likes: 0
Re: (menkio)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by menkio »</TD></TR><TR><TD CLASS="quote">and change your name, it's ******* stupid </TD></TR></TABLE>
Lmao.
Lmao.
Thread Starter
Member
Joined: Jan 2005
Posts: 1,454
Likes: 0
From: Terre Haute, IN
Re: (JDM-EJ1)
I usually use "O 16581 72452 5", i didn't get a confirmation e-mail and had to add something to register a new name.
It's the username i've had for years around the 'net, i'm not changing it.
I'll see what Welding/Fabrication says. Yeah, i'm sure i sound like a douche bag from this thread, but i enjoy DIY projects.
It's the username i've had for years around the 'net, i'm not changing it.
I'll see what Welding/Fabrication says. Yeah, i'm sure i sound like a douche bag from this thread, but i enjoy DIY projects.
Thread
Thread Starter
Forum
Replies
Last Post
Confuc1ous
Honda Accord (1990 - 2002)
17
Jun 22, 2003 12:23 PM