Does anyone have a diagram for this or do they just color match pin to pin? Oh yeah, and where can I find a block of plug for my resistor box connector?

 

a 94 jdm distributor IS obd1 and does nto need to be altered to fit another obd1 harness.

 

Jdm distributor is 1 connector while usdm is 2 and this is supposed to fit how?

 

if it is one plug them it is most lilely obd2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redlineracer &raquo;</TD></TR><TR><TD CLASS="quote">Jdm distributor is 1 connector while usdm is 2 and this is supposed to fit how?</TD></TR></TABLE>

the JDM connector is exactly the same as the USDM so it sounds like what the guy above said....you got an obd2 distributor.

 

here you go got this from another thread

 

thanks alot. I was actually able to find a wiring diagram for the car and motor, so what I did was spliced both the obd1 and obd2 connectors together and am now able to run either one distributor wise and can run either obd0 or obd1 ecu's w/o any problems.