I tried posting this in the Integra forum but no one was helpful, so Ill try here!

My Integra is obd0, Im switching to obd1.

I have a obd1 dissy, and the plugs from a obd1 wiring harness so all I need to do is repin the old wires into the new obd1 plugs.


I got this diagram and I forgot how to read it; does anyone have a better diagram. I just need to know what wires go where!

Nick

 

evening bump

 

Whose conversion harness do you have? There are differences in the harnesses that are sold all over.

 

all the wires are the same color

just match.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by irev210 &raquo;</TD></TR><TR><TD CLASS="quote">all the wires are the same color

just match.

</TD></TR></TABLE>

Not always true... Here is what I was looking for. The diagram I had, I had forgotten how to read and on top of that it was for OEM wiring.

This is the link that helped me figure out what I need to re-pin
http://www.phase-shift.net/pha...1.htm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">Whose conversion harness do you have? There are differences in the harnesses that are sold all over. </TD></TR></TABLE>

I forget the name of the harness I got, but it had something to do with a frog in the name, Im sure you know of it Blown since your in that field of business.

I didn't need a harness as you can see in the above post... I think at one point blown you told me that you were trying to make obd0-obd1 dissy harnesses... I could be wrong though ? ... Anyways......

 

I do make the OBD0-1 distributor harness jumpers as well. If you got it from Frog, then I think they match theirs as function for function....or sensor for sensor.

Jason

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">I do make the OBD0-1 distributor harness jumpers as well. If you got it from Frog, then I think they match theirs as function for function....or sensor for sensor.

Jason</TD></TR></TABLE>

who made them first!



dats old schoo!

 

what about obd2 to obd1?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">I do make the OBD0-1 distributor harness jumpers as well. If you got it from Frog, then I think they match theirs as function for function....or sensor for sensor.

Jason</TD></TR></TABLE>

The frog one doesnt even include the the dissy. You just get the harness to convert to obd1+8 wires, vtec, vtec pressure, o2 sensor.
You have to do the dissy yourself. Its not a big deal then obd0 wires repin into the obd1 plastic peice no problem, Id hate to have that big peice of extra wire on my dissy. Its Fugly