Kuhniee

I have a eg hatch with a jdm b16a. it vibrates when accelerating at low rpms. Like when im not ripping on it is when it does this. What are the possible causes of vibrations like this... it seems to come from the drivers side.

Kuhniee

another note is that i replaces the axle over winter and i dont remember it doing that when i put it away

hondamark35

maybe mounts..?

could it be the engine running rough/struggling maybe caused by old, worn ignition components?

vibration caused by bad axles is more specifically related to torque output and vehicle speed, not engine RPM. and since your motor is known for it's very modest low-end torque...

could also be worn suspension components like the LCA bushings or ball joints.

Kuhniee

im waiting on free time cause i got mount inserts... could that help?

Rok_Stok

Axles, tires do it sometimes, but I've had axles do it more than anything , especially the axles I've gotten from Hmotors.

Kuhniee

its just a duralast one... i have the 95 jdm b16a so its out of a del sol vtec so tahts the axel i got... the del sol vtec one. tahts what i was told to get is that correct??

b20bFourDoorCivicLX

im getting a slight vibration when acceleration . ive replaced my tie rods, inner tie rie rod both sides, wheel bearings....rotors,pads, new suspension...
i have a bad axle with grease squirting everywhere, could that be my problem?

grant97teg

Yuuuuuuup, get new axles.

b20bFourDoorCivicLX

thanks bro.im confused, cuz i just replaced alot of things including motor mount, (post mount cuz it was cracked) along with the tie rods(inner), rotors,pads,struts,ground controls),wheel bearings

ill get it fixed asap

grant97teg

Get down to the alignment shop, really bad toe out/in can feel weired and drive wiered as hell too