Honda-Tech - Honda Forum Discussion
0 2016/01/07 22:01:54
0 2016/01/07 22:00:31
i bought all Green Mishimoto couplers and mishimoto clamps for it. Green accents to match lug nuts and Takata harness sitting in my closet
i bought all Green Mishimoto couplers and mishimoto clamps for it. Green accents to match lug nuts and Takata harness sitting in my closet
0 2016/01/07 21:58:43
I bought some bends and was eager to start welding. I mounted my intercooler and decided to just jump into welding without learning the settings on my machine first. that was a mistake. burnt a hole in my intercooler mount bracket.
I bought some bends and was eager to start welding. I mounted my intercooler and decided to just jump into welding without learning the settings on my machine first. that was a mistake. burnt a hole in my intercooler mount bracket.
0 2016/01/07 21:55:33
Built a mount for fuse panel out of some random brackets kicking around.
Built a mount for fuse panel out of some random brackets kicking around.
0 2016/01/07 21:54:02
working on wiring, thats just a spare harness on the ground. needed some plugs and pieces
working on wiring, thats just a spare harness on the ground. needed some plugs and pieces
0 2016/01/07 21:52:07
Its hard to find time for this build, i work full time and overtime often, and have a wife and kid to spend a lot of time with. But i find staying up friday nights with coffee or beer is the best time to get stuff done
Its hard to find time for this build, i work full time and overtime often, and have a wife and kid to spend a lot of time with. But i find staying up friday nights with coffee or beer is the best time to get stuff done
0 2016/01/07 21:50:08
0 2016/01/07 21:49:13
started deleting. looking much cleaner already
started deleting. looking much cleaner already
0 2016/01/07 21:47:53
so cluttered
so cluttered
0 2016/01/07 21:46:33
Just getting ready to pull the dash
Just getting ready to pull the dash
0 2016/01/07 21:45:13
So goals for this leg of the build. Relocate battery to trunk, partial wire tuck, relocate fuse panel to cabin, delete power steering, delete windshield washer, and a clean turbo install. I know the turbo parts are cheap. But this project is to teach myself fabrication and how to tune. When i blow this setup up, thats when i will shell out $$ for a proper setup.
So goals for this leg of the build. Relocate battery to trunk, partial wire tuck, relocate fuse panel to cabin, delete power steering, delete windshield washer, and a clean turbo install. I know the turbo parts are cheap. But this project is to teach myself fabrication and how to tune. When i blow this setup up, thats when i will shell out $$ for a proper setup.
0 2016/01/07 21:41:20
Test fit
Test fit
0 2016/01/07 21:39:02
So i set up my lincoln welder and was too eager to wait for a bottle of Gas. Decided to play with the flux core... which seriously sucks and i bought a bottle of Gas the next day. But this is my coolant catch can.
So i set up my lincoln welder and was too eager to wait for a bottle of Gas. Decided to play with the flux core... which seriously sucks and i bought a bottle of Gas the next day. But this is my coolant catch can.
0 2016/01/07 21:37:05
Picked up a Precision intercooler for 100$ will fit nicely
Picked up a Precision intercooler for 100$ will fit nicely
0 2016/01/07 21:35:50
just starting to test fit
just starting to test fit
0 2016/01/07 21:33:53
Near where i live, on Vancouver island
Near where i live, on Vancouver island
0 2016/01/07 21:32:11
Daily driver, but slowly modding it
Daily driver, but slowly modding it
0 2016/01/05 21:49:06
0 2016/01/05 21:48:25
0 2016/01/05 21:46:43
So my mom just bought a house and gave me full access to the garage for the next leg of this build. I have always wanted to learn how to weld, so i bought a Lincoln Mig welder and decided to set up shop here. Time for boost Also time for bed. will continue this later in the week. Any feedback is appreciated.
So my mom just bought a house and gave me full access to the garage for the next leg of this build. I have always wanted to learn how to weld, so i bought a Lincoln Mig welder and decided to set up shop here. Time for boost Also time for bed. will continue this later in the week. Any feedback is appreciated.
0 2016/01/04 22:37:26
0 2016/01/04 22:34:54
This was at my old work. Fortunate to own the snap on box in the background. Did the alignment here.
This was at my old work. Fortunate to own the snap on box in the background. Did the alignment here.
0 2016/01/04 22:33:32
0 2016/01/04 22:32:48
I did this leg of the build at my dads house, big shout out to him for all the support and help with the body.
I did this leg of the build at my dads house, big shout out to him for all the support and help with the body.
0 2016/01/04 22:31:25
Finally alive. Runs good. Seems to burn a bit of oil off throttle and then on again at higher rpm. Suspect valve seals as Vacuum is high then. Too lazy to do know. Future jakes problem.
Finally alive. Runs good. Seems to burn a bit of oil off throttle and then on again at higher rpm. Suspect valve seals as Vacuum is high then. Too lazy to do know. Future jakes problem.
0 2016/01/04 22:29:18
0 2016/01/04 22:28:26
0 2016/01/04 22:27:42
I did this a few years ago now, I used a b18a from 93 teg, with b18b intake manifold and injectors. other bits and pieced from multiple b18s to make it work again. New t-belt and water pump. tune up etc.
I did this a few years ago now, I used a b18a from 93 teg, with b18b intake manifold and injectors. other bits and pieced from multiple b18s to make it work again. New t-belt and water pump. tune up etc.
0 2016/01/04 22:25:47
At least i got the GSR tranny from a parts car. Was happy to find out it had no grinds and cleaned up nicely.
At least i got the GSR tranny from a parts car. Was happy to find out it had no grinds and cleaned up nicely.
0 2016/01/04 22:24:19
Ive had H22 swaps, B18c1 and others fall into my lap, but bills have always forced me to sell em. So this donor b18a was near free. This wont be a permanent solution for this car. But will do till it blows.
Ive had H22 swaps, B18c1 and others fall into my lap, but bills have always forced me to sell em. So this donor b18a was near free. This wont be a permanent solution for this car. But will do till it blows.
0 2016/01/04 22:21:53
I worked side jobs and sold parts to pay for these. ACT clutch and lightened flywheel.
I worked side jobs and sold parts to pay for these. ACT clutch and lightened flywheel.
0 2016/01/04 22:20:21
Image in motion christmas special. I think these were around 150$
Image in motion christmas special. I think these were around 150$
0 2016/01/04 22:19:14
0 2016/01/04 22:06:05
0 2016/01/04 21:56:22
0 2016/01/04 21:55:55
0 2016/01/04 21:55:12
0 2016/01/04 21:53:25
0 2016/01/04 21:52:54
0 2016/01/04 21:52:30