Honda-Tech - Honda Forum Discussion
0 2017/09/08 14:27:30
0 2017/09/11 11:48:01
0 2017/09/11 11:48:02
0 2017/09/11 11:48:03
0 2017/09/11 11:48:04
0 2017/09/11 11:48:05
0 2017/09/13 08:16:57
0 2017/09/13 08:16:59
0 2017/09/13 19:10:21
0 2017/09/14 18:08:11
0 2017/09/14 18:08:23
0 2017/09/15 17:44:18
0 2017/09/17 17:12:52
0 2017/09/17 17:13:00
0 2017/09/18 09:43:34
0 2017/09/21 17:19:58
This is how much $40 something gets you in nuts and bolts from the stealership. Stuff for the shifter.
This is how much $40 something gets you in nuts and bolts from the stealership. Stuff for the shifter.
0 2017/09/22 16:39:28
The bolt closest to the bottom of pic was missing completely. I thought about just using the one shown I had layin around, but decided while I had everything apart to just get all oem stuff and do it right.
The bolt closest to the bottom of pic was missing completely. I thought about just using the one shown I had layin around, but decided while I had everything apart to just get all oem stuff and do it right.
0 2017/09/22 16:39:37
New main seal installed. I used the drill and screw method to pull the old one out. Could definitely see it was leaking, didnt look like oem brand. Used old one to tap the new into place.
New main seal installed. I used the drill and screw method to pull the old one out. Could definitely see it was leaking, didnt look like oem brand. Used old one to tap the new into place.
0 2017/09/22 16:39:45
Flywheel torqued and lookin pretty
Flywheel torqued and lookin pretty
0 2017/09/22 16:39:53
Got this sweet universal clutch alignment kit from napa for $20. Was the only place I could find in the area that had one after callin around.
Got this sweet universal clutch alignment kit from napa for $20. Was the only place I could find in the area that had one after callin around.
0 2017/09/22 16:40:01
0 2017/09/22 16:40:09
Got to use my new click style torque wrench lots on this project.
Got to use my new click style torque wrench lots on this project.
0 2017/09/22 16:40:16
Back in place
Back in place
0 2017/09/22 16:40:23
0 2017/09/22 16:40:30
New oem bolts in
New oem bolts in
0 2017/09/23 09:20:06
0 2017/09/23 09:20:12
Doesn't hang down and touch the exhaust anymore :D
Doesn't hang down and touch the exhaust anymore :D
0 2017/09/23 09:20:18
Here's what I had to do to get the one mount to tighten down, added the 4 washers. I think this probably contributed to how much better the car feels as well.
Here's what I had to do to get the one mount to tighten down, added the 4 washers. I think this probably contributed to how much better the car feels as well.
0 2017/09/24 06:10:27
Feed line, can barely see but there's a small orifice down in there.
Feed line, can barely see but there's a small orifice down in there.
0 2017/09/25 15:53:37
On the turbo, maybe a .13"ish opening.
On the turbo, maybe a .13"ish opening.
0 2017/09/25 15:53:42
0 2017/09/28 09:42:51
0 2017/09/28 09:42:52
0 2017/09/28 09:46:27
Current AFR. Awful.
Current AFR. Awful.
0 2017/09/28 16:20:48
Boost/vac. Even worse.
Boost/vac. Even worse.
0 2017/09/28 16:20:53
New triple pod plan. The third gauge I plan to add oil temp at some point.
New triple pod plan. The third gauge I plan to add oil temp at some point.
0 2017/09/28 16:20:59
0 2017/10/01 08:17:39
0 2017/10/01 08:17:45
Can't believe how cramped it is in there! At first I thought I'd have to pull the engine just to get at it.
Can't believe how cramped it is in there! At first I thought I'd have to pull the engine just to get at it.
0 2017/10/03 05:47:05