Honda-Tech - Honda Forum Discussion
0 2022/06/24 10:10:38
15-30-60ft/lbs in the sequence
15-30-60ft/lbs in the sequence
0 2022/06/24 10:11:51
Torque sequence
Torque sequence
0 2022/06/24 10:15:43
$46 for a new one?
$46 for a new one?
0 2022/06/24 15:46:22
$46 for a new one?
$46 for a new one?
0 2022/06/24 15:46:27
Cam seal on all the way?
Cam seal on all the way?
0 2022/06/27 16:23:49
Cam seal on all the way?
Cam seal on all the way?
0 2022/06/27 16:23:55
Cylinder 1 all the way up.
Cylinder 1 all the way up.
0 2022/06/27 16:27:00
See arrow and key spot on snout bit lined up.
See arrow and key spot on snout bit lined up.
0 2022/06/27 16:29:39
Assembly oil dripping out…
Assembly oil dripping out…
0 2022/06/27 16:35:08
0 2022/07/16 10:42:54
0 2022/08/04 08:10:14
0 2022/08/04 08:10:40
0 2022/08/04 08:15:40
See red arrow
See red arrow
0 2022/08/11 20:30:21
10mm, 11mm, 12.7mm (1/2”)
10mm, 11mm, 12.7mm (1/2”)
0 2022/08/20 08:12:03
Golden Eagle Manufacturing recommended break in for their sleeves.
Golden Eagle Manufacturing recommended break in for their sleeves.
0 2022/08/29 10:53:28
PTE 4831B and 3” V-band to 3” Go-Autoworks downpipe.
PTE 4831B and 3” V-band to 3” Go-Autoworks downpipe.
0 2022/08/31 21:28:28
Khumo road huggers (average) on GSR blades
Khumo road huggers (average) on GSR blades
0 2022/08/31 21:29:49
Tee, 1/8NPT to 4AN fittings then 4 AN hose with heat shield.
Tee, 1/8NPT to 4AN fittings then 4 AN hose with heat shield.
0 2022/09/01 15:05:58
4 AN hose at a 90degree bend going into a 0.065 restrictor.
4 AN hose at a 90degree bend going into a 0.065 restrictor.
0 2022/09/01 15:06:05
D16Z6 head bolt on left, and 625 plus 11mm x 1.5 SRT4 stud on the right.
D16Z6 head bolt on left, and 625 plus 11mm x 1.5 SRT4 stud on the right.
0 2022/09/08 14:44:14
0 2022/09/23 22:23:45
J series cylinder head parts
J series cylinder head parts
0 2022/10/06 14:01:07
J engine with K transmission parts
J engine with K transmission parts
0 2022/10/07 14:09:21