Honda-Tech - Honda Forum Discussion
0 2017/04/12 12:30:26
0 2017/04/12 12:30:27
The bolts holding the grill were originally held on with wire and bobby pins. I used some rivet nuts and 10mm bolts and it looks oem.
The bolts holding the grill were originally held on with wire and bobby pins. I used some rivet nuts and 10mm bolts and it looks oem.
0 2017/04/12 12:30:28
Freshly painted fender. Still has some wax residue.
Freshly painted fender. Still has some wax residue.
0 2017/04/12 12:30:29
Looks a little dull but most of that is the light and some wax. Ill take better pics later.
Looks a little dull but most of that is the light and some wax. Ill take better pics later.
0 2017/04/12 12:30:31
I only painted the fender about 1/2 way down and faded the paint. I didn't want it to be perfect, I wanted it to look like it wasn't painted.
I only painted the fender about 1/2 way down and faded the paint. I didn't want it to be perfect, I wanted it to look like it wasn't painted.
0 2017/04/12 12:30:32
0 2017/04/12 13:03:57
0 2017/04/12 13:04:28
Both extension harnesses so that the engine wire harness only enters the firewall on one side.
Both extension harnesses so that the engine wire harness only enters the firewall on one side.
0 2017/04/18 19:14:31
Fender after trying to bang it out, after some bondo work and a lot of sanding it could have looked ok but i opted t replace it instead since it needed to be painted anyway.
Fender after trying to bang it out, after some bondo work and a lot of sanding it could have looked ok but i opted t replace it instead since it needed to be painted anyway.
0 2017/04/20 17:42:13
0 2017/04/20 17:42:14
0 2017/04/20 17:42:15
0 2017/04/20 17:42:17
New Fender after painting. I did use some high fill primer on a few spots to smooth it out but again this does not need to be perfect.
New Fender after painting. I did use some high fill primer on a few spots to smooth it out but again this does not need to be perfect.
0 2017/04/20 17:42:18
0 2017/04/20 17:42:19
The shadows make it look a bit funny but ill take some additional pics once installed and Sanded/Buffed/waxed.
The shadows make it look a bit funny but ill take some additional pics once installed and Sanded/Buffed/waxed.
0 2017/04/20 17:42:20
Replacement Fender before painting.
Replacement Fender before painting.
0 2017/04/24 08:13:11
Missing sway bar bushing
Missing sway bar bushing
0 2017/04/24 08:13:11
Driver side door harness
Driver side door harness
0 2017/04/24 08:13:12
Driver side harness once removed, there should be 15 wires.
Driver side harness once removed, there should be 15 wires.
0 2017/04/24 08:13:13
Driver side harness after being repaired.
Driver side harness after being repaired.
0 2017/04/24 08:13:14
0 2017/04/24 08:39:58
Some Amazon center caps with Ninjas.
Some Amazon center caps with Ninjas.
0 2017/04/24 08:39:59
Custom Vtec Sticker.
Custom Vtec Sticker.
0 2017/04/24 08:40:00
0 2017/04/24 08:40:01
OBX Twin Loop muffler
OBX Twin Loop muffler
0 2017/04/24 08:40:02
0 2017/04/24 08:40:03
0 2017/04/24 08:40:04
0 2017/04/24 08:40:05
Noticed a few days later that the AC condenser was off the mounts.
Noticed a few days later that the AC condenser was off the mounts.
0 2017/04/24 08:40:06
0 2017/04/24 08:40:07
0 2017/05/06 11:23:19
0 2017/05/06 14:28:19
0 2017/05/06 14:28:20
0 2017/05/06 14:28:21
0 2017/05/06 14:28:22
0 2017/05/06 14:28:23
0 2017/05/06 14:28:24
0 2017/05/07 17:20:15
0 2017/05/07 17:20:16