Honda-Tech - Honda Forum Discussion
0 2015/12/20 12:37:02
0 2015/12/22 22:59:49
0 2016/04/28 10:27:28
0 2016/04/28 10:29:28
0 2016/05/31 15:52:51
Umm the top two wires are from injectors one and three. They were tap taped under. Not being used. Lol
Umm the top two wires are from injectors one and three. They were tap taped under. Not being used. Lol
0 2017/01/20 14:53:43
0 2017/01/20 15:13:40
So this is my harness. I just opened it up. Ive seen a picture that says. Injector 4 is top right of the 8 pin plug for the resistor box. 12 volts below it and to the left injectors 123. Correct me if im wrong. Blue is injector 2 brown4 red3 yellow1. I cut the brown blue and two yellow and blacks ones. The solid red and yellow wires from 3 and 1 were taped down under electrical tape. The ''12v'' wire at the resister box plug goes and splits and takes the place of injector wires 1 and 3? Si
So this is my harness. I just opened it up. Ive seen a picture that says. Injector 4 is top right of the 8 pin plug for the resistor box. 12 volts below it and to the left injectors 123. Correct me if im wrong. Blue is injector 2 brown4 red3 yellow1. I cut the brown blue and two yellow and blacks ones. The solid red and yellow wires from 3 and 1 were taped down under electrical tape. The ''12v'' wire at the resister box plug goes and splits and takes the place of injector wires 1 and 3? Si
0 2017/01/20 15:14:19
From left to right i assume its injector 1234. Some write ups state that wires should be brown red blue yellow but they go from left to right yellow blue red brown on mine. Lol i just want to confirm with yall that with my harness the way it is with the colors that my yellow will go to A1 on the ecu blue to A3 red to A5 and brown to A7?
From left to right i assume its injector 1234. Some write ups state that wires should be brown red blue yellow but they go from left to right yellow blue red brown on mine. Lol i just want to confirm with yall that with my harness the way it is with the colors that my yellow will go to A1 on the ecu blue to A3 red to A5 and brown to A7?
0 2017/01/20 18:37:37
0 2017/01/22 10:29:53
0 2017/01/22 10:45:09
0 2017/01/22 10:53:56
0 2017/02/25 15:36:40
0 2017/02/25 15:37:24
0 2017/02/26 14:41:57
0 2017/02/26 14:43:17
0 2017/02/26 14:44:29
0 2017/02/27 09:39:18
0 2017/02/28 09:05:28
0 2017/02/28 09:06:13
I have the copper "striker" on the rotor on the same side of that small line right there
I have the copper "striker" on the rotor on the same side of that small line right there
0 2017/02/28 09:07:35
That small line on the left of the center shaft. I put the copper part of the distributor rotor on the same side of the line if you know what i mean
That small line on the left of the center shaft. I put the copper part of the distributor rotor on the same side of the line if you know what i mean
0 2017/02/28 09:55:56
0 2017/03/05 19:42:03
0 2017/03/05 19:42:23
0 2017/03/05 19:42:41
0 2017/03/05 19:43:05
0 2017/03/05 20:02:32
0 2017/03/05 20:03:11
0 2017/03/05 20:04:46
Like i said theres a B with a 1&2 so is that pink or yellow my guess is that C1 is yellow and C2 is green A1 is red but thats only 4!!!!
Like i said theres a B with a 1&2 so is that pink or yellow my guess is that C1 is yellow and C2 is green A1 is red but thats only 4!!!!
0 2018/02/13 14:24:59
0 2018/02/13 14:29:05
The C1 looks just like this C2
The C1 looks just like this C2
0 2018/02/13 14:29:58
Closest to the trans is this A1
Closest to the trans is this A1
0 2018/02/13 14:31:34
0 2018/02/24 15:36:59
0 2018/04/22 10:27:29
0 2018/04/22 13:57:30
0 2018/06/19 11:36:33
0 2018/06/19 11:36:33
0 2018/06/20 16:10:38
0 2018/06/20 16:17:21