So this is my harness. I just opened it up. Ive seen a picture that says. Injector 4 is top right of the 8 pin plug for the resistor box. 12 volts below it and to the left injectors 123. Correct me if im wrong. Blue is injector 2 brown4 red3 yellow1. I cut the brown blue and two yellow and blacks ones. The solid red and yellow wires from 3 and 1 were taped down under electrical tape. The ''12v'' wire at the resister box plug goes and splits and takes the place of injector wires 1 and 3? Si