Honda-Tech - Honda Forum Discussion
After driving it for a while we finally find many issues to fix. Both hubs gave out so I'm waiting on those to come in from karcepts. Will be doing arp extended studs and upgrading to hawk pads and stop tech rotors in the front when I start working on that. My oil pan is leaking so I still need to address that along with my drain back from the turbo. Eventually the trans has to come back and get resealed due that having a leak also. Basically everything leaks lol but we will get there.
After driving it for a while we finally find many issues to fix. Both hubs gave out so I'm waiting on those to come in from karcepts. Will be doing arp extended studs and upgrading to hawk pads and stop tech rotors in the front when I start working on that. My oil pan is leaking so I still need to address that along with my drain back from the turbo. Eventually the trans has to come back and get resealed due that having a leak also. Basically everything leaks lol but we will get there.
0 2016/12/12 21:06:17
0 2016/11/20 09:45:03
0 2016/11/20 09:44:32
0 2016/11/20 09:43:30
0 2016/11/20 09:42:22
0 2016/11/20 09:42:20
0 2016/11/20 09:42:17
0 2016/11/20 09:42:14
0 2016/11/20 09:40:39
0 2016/09/23 08:34:14
0 2016/09/23 08:32:38
0 2016/09/23 08:32:13
0 2016/08/27 18:03:59
a buddy of mine took some high quality pictures of the car last night. We also finally drove it around the block and damn did it feel good! Monday going to take the car to get the exhaust all welded up. Still waiting on a catch can for it, then it will be off to tune at redzone to see what she will put down!
a buddy of mine took some high quality pictures of the car last night. We also finally drove it around the block and damn did it feel good! Monday going to take the car to get the exhaust all welded up. Still waiting on a catch can for it, then it will be off to tune at redzone to see what she will put down!
0 2016/08/27 18:01:48
Here it is people. In all its glory! Today is the day we start her up. Going to last minute check everything we have done over. I guess you could say I'm excited and nervous all at the same time
Here it is people. In all its glory! Today is the day we start her up. Going to last minute check everything we have done over. I guess you could say I'm excited and nervous all at the same time
0 2016/08/23 17:56:48
It's Friday so I bring to you a painted bay!
It's Friday so I bring to you a painted bay!
0 2016/08/19 08:27:17
To laying down primer
To laying down primer
0 2016/08/17 11:37:53
Dana has worked his magic on this from sanding and prepping
Dana has worked his magic on this from sanding and prepping
0 2016/08/17 11:37:47
Sorry for the delays of posts. Just got the car back from fab and damn does it look good. Next stop was Dana aka efnstatics house to get some engine bay work done. The motor is back out. The bay is sanded and should be shot this weekend. My hopes are to have this thing running by next weekend for the NorCal Ef va Da meet 🙏🏽
Sorry for the delays of posts. Just got the car back from fab and damn does it look good. Next stop was Dana aka efnstatics house to get some engine bay work done. The motor is back out. The bay is sanded and should be shot this weekend. My hopes are to have this thing running by next weekend for the NorCal Ef va Da meet 🙏🏽
0 2016/08/12 17:17:57
The intercooler is mounted and sits perfectly behind the ef8 bumper. No cutting of the bumper needed!
The intercooler is mounted and sits perfectly behind the ef8 bumper. No cutting of the bumper needed!
0 2016/06/16 19:15:16
Well this happened this past weekend! Took the time to just hang the motor for now just so I could get it over to kellybuilt for all the fab work. Was surprised at how well the manifold and turbo fit. Only had to cut the hood in one spot to clear the turbo. The only downfall was the wastegate sits very close to the radiator so we will see how that goes once it's all running
Well this happened this past weekend! Took the time to just hang the motor for now just so I could get it over to kellybuilt for all the fab work. Was surprised at how well the manifold and turbo fit. Only had to cut the hood in one spot to clear the turbo. The only downfall was the wastegate sits very close to the radiator so we will see how that goes once it's all running
0 2016/06/16 19:12:27
I got good news today for you all! The manifold finally came back almost ready to be dropped into the crx. Now I just have to order mounts for it 😁
I got good news today for you all! The manifold finally came back almost ready to be dropped into the crx. Now I just have to order mounts for it 😁
0 2016/05/25 17:58:13
I got good new and I got bad news. Good new is the motor is finally done and back. The bad news is I've had the wrong manifold this whole time. So now I'm waiting to hear back about that. On top of that I ordered side skirts for the crx and was sent the wrong product. It's been one struggle of a week. I really hope my luck turns around with all this.
I got good new and I got bad news. Good new is the motor is finally done and back. The bad news is I've had the wrong manifold this whole time. So now I'm waiting to hear back about that. On top of that I ordered side skirts for the crx and was sent the wrong product. It's been one struggle of a week. I really hope my luck turns around with all this.
0 2016/04/25 21:17:26
Today's pick up was a fiber image sir hood! So light I can't wait to slap it on!
Today's pick up was a fiber image sir hood! So light I can't wait to slap it on!
0 2016/04/22 18:27:10
Just more parts. My motor should be done this weekend I hope! Took the car to kellybuilt for some fab work on an oil catch can/ coolant reservoir while we wait for more parts to show up 😀 Happy Wednesday everyone
Just more parts. My motor should be done this weekend I hope! Took the car to kellybuilt for some fab work on an oil catch can/ coolant reservoir while we wait for more parts to show up 😀 Happy Wednesday everyone
0 2016/04/13 17:39:10
Well we aren't going to have any clutch slipping problems at all.
Well we aren't going to have any clutch slipping problems at all.
0 2016/04/07 19:08:21
I do say the bogarts look bad ass on the crx 😁😁😁
I do say the bogarts look bad ass on the crx 😁😁😁
0 2016/03/22 10:50:12
Getting down to the last parts needed for the build. All that's left are mounts and throttle body. Also waiting on the motor to be assembled. Getting so close yet so far away 😁
Getting down to the last parts needed for the build. All that's left are mounts and throttle body. Also waiting on the motor to be assembled. Getting so close yet so far away 😁
0 2016/03/20 21:44:43
Picked up some bogarts for slicks. Couldn't pass up a good deal. Should look good on the Rex
Picked up some bogarts for slicks. Couldn't pass up a good deal. Should look good on the Rex
0 2016/03/05 10:58:01
Just got my back door intercooler today. Fits perfectly behind the sir bumper no cutting needed 😊
Just got my back door intercooler today. Fits perfectly behind the sir bumper no cutting needed 😊
0 2016/02/25 17:43:58
The latest and greatest update. Just more parts! Picked some rc 750cc injectors hopefully that will be enough fuel. Plus picked up a tail bov. Most of my parts have come from friends and Craigslist lol. In a way it's budget built which is kinda nice 🙃
The latest and greatest update. Just more parts! Picked some rc 750cc injectors hopefully that will be enough fuel. Plus picked up a tail bov. Most of my parts have come from friends and Craigslist lol. In a way it's budget built which is kinda nice 🙃
0 2016/01/28 21:18:27
Here's the motor. This is the start of it. Now it's time to take it to Redzone to get it assembled. I can't wait!
Here's the motor. This is the start of it. Now it's time to take it to Redzone to get it assembled. I can't wait!
0 2016/01/17 21:26:20
Not much of an update but I'm pretty much just parts collecting at the moment. Picked up a rywire tuck harness last night and last week I went to atp turbo to pick up some bolts I need for the turbo. The goal is to have the car done by March which means I hope to have the motor done by mid February 🙃
Not much of an update but I'm pretty much just parts collecting at the moment. Picked up a rywire tuck harness last night and last week I went to atp turbo to pick up some bolts I need for the turbo. The goal is to have the car done by March which means I hope to have the motor done by mid February 🙃
0 2016/01/11 09:02:40
Just picked up a ported and shimmed oil pump plus a couple seals
Just picked up a ported and shimmed oil pump plus a couple seals
0 2016/01/02 18:03:33
This just came in today my sheepybuilt manifold! 😀😀😀😀😀
This just came in today my sheepybuilt manifold! 😀😀😀😀😀
0 2015/12/31 14:52:17
It is now fully functional
It is now fully functional
0 2015/12/27 09:33:39
Well Santa was good to me this year. With the k-tuned s2k cluster adapter we can finish up the install video for s2k cluster into ef. That will be released here shortly hopefully. And with the skunk2 half core radiator to make room for my 60 trim. Just wait till you guys see what manifold I will be running 😬
Well Santa was good to me this year. With the k-tuned s2k cluster adapter we can finish up the install video for s2k cluster into ef. That will be released here shortly hopefully. And with the skunk2 half core radiator to make room for my 60 trim. Just wait till you guys see what manifold I will be running 😬
0 2015/12/25 09:28:12
Took her out to a local meet today. She's running pretty healthy now electrical wise 😊
Took her out to a local meet today. She's running pretty healthy now electrical wise 😊
0 2015/12/05 23:42:43
Well guys that just happened. Ap2 cluster in the crx using the cjs harness. Couldn't be more happy with it
Well guys that just happened. Ap2 cluster in the crx using the cjs harness. Couldn't be more happy with it
0 2015/12/02 21:32:44
Good news everyone hit up Ef parts on Monday and he actually had a perfectly good harness for me just got it today now time to take the old one out and put this in
Good news everyone hit up Ef parts on Monday and he actually had a perfectly good harness for me just got it today now time to take the old one out and put this in
0 2015/11/25 16:05:19