Honda-Tech - Honda Forum Discussion
Motor is finally back in. Going to send my radiator out to have a shroud built for it then I’ll finish it up.
Motor is finally back in. Going to send my radiator out to have a shroud built for it then I’ll finish it up.
0 2019/02/20 14:19:09
As you can see the headgasket was pretty blown
As you can see the headgasket was pretty blown
0 2019/01/14 08:39:51
Yesterday finally got the motor out and apart
Yesterday finally got the motor out and apart
0 2019/01/14 08:39:51
All new parts went into it. Including a new bad guys oil pump. New arp headstuds flywheel bolts and pressure plate bolts. All new gaskets from Honda. Hoping to race more this year 🙏🏼
All new parts went into it. Including a new bad guys oil pump. New arp headstuds flywheel bolts and pressure plate bolts. All new gaskets from Honda. Hoping to race more this year 🙏🏼
0 2019/01/14 08:39:51
Out with the old carpet
Out with the old carpet
0 2018/12/17 10:41:19
In with the new carpet thanks to hmo
In with the new carpet thanks to hmo
0 2018/12/17 10:41:19
Picked up 2 225/50 advan ao48s and damn what a difference these made over my 205/50 nitto nto5
Picked up 2 225/50 advan ao48s and damn what a difference these made over my 205/50 nitto nto5
0 2018/09/22 07:56:37
0 2018/09/22 07:56:37
0 2018/08/28 20:25:21
Updated pic of the engine bay. New skunk hoses and the manifolds in. Car runs pretty good so far
Updated pic of the engine bay. New skunk hoses and the manifolds in. Car runs pretty good so far
0 2018/08/22 17:19:28
Finally! After 3 weeks finally got my sheepey manifold back from ceramic coating and damn it looks so good! Tomorrow I will get the car back together and take her for a drive again!
Finally! After 3 weeks finally got my sheepey manifold back from ceramic coating and damn it looks so good! Tomorrow I will get the car back together and take her for a drive again!
0 2018/08/13 20:58:34
Relocated the license plate bracket today now the intercooler and radiator should be getting full air to it. Sent my manifold off to get ceramic coated so just waiting for that to get back to put the car back together. Picked up a new oil feed line because my other one the fitting was kinda messed up on it. Also picked up new hoses that I will throw on eventually.
Relocated the license plate bracket today now the intercooler and radiator should be getting full air to it. Sent my manifold off to get ceramic coated so just waiting for that to get back to put the car back together. Picked up a new oil feed line because my other one the fitting was kinda messed up on it. Also picked up new hoses that I will throw on eventually.
0 2018/07/30 17:51:00
Took her out to cruise 2 Cruz last weekend and had a blast. Had great feedback on her. It was probably the longest I have ever drove her about 100 miles round trip. I have found we have a little over heating issue. I believe it’s really just from heat soak and it’s been pretty hot here. I pulled the manifold off to go get it ceramic coated. Going to build a fan shroud and try to make an intake for the turbo.
Took her out to cruise 2 Cruz last weekend and had a blast. Had great feedback on her. It was probably the longest I have ever drove her about 100 miles round trip. I have found we have a little over heating issue. I believe it’s really just from heat soak and it’s been pretty hot here. I pulled the manifold off to go get it ceramic coated. Going to build a fan shroud and try to make an intake for the turbo.
0 2018/07/25 06:40:40
0 2018/07/17 19:35:04
Today I installed a torque mount to try and keep the pressure off the rear mount due to my subframe being for b series because of the rhd.
Today I installed a torque mount to try and keep the pressure off the rear mount due to my subframe being for b series because of the rhd.
0 2018/07/03 17:56:17
So this is how the car sits right now. She’s running driving great! I couldn’t be happier with it. I got some parts coming in that I’m excited about and hopefully I can start updating this thread again. So stay tuned. I know I’m not on here every day so bare with me.
So this is how the car sits right now. She’s running driving great! I couldn’t be happier with it. I got some parts coming in that I’m excited about and hopefully I can start updating this thread again. So stay tuned. I know I’m not on here every day so bare with me.
0 2018/07/02 21:42:49
0 2018/03/15 11:59:52
Just got the car tuned at ldl in Sacramento! Car made 350 on a mustang dyno. Pretty freaking happy with the numbers! Now I’m just fixing little stuff here and there. Plus we have track this weekend so I’m prepping for that. Hopefully it all goes well
Just got the car tuned at ldl in Sacramento! Car made 350 on a mustang dyno. Pretty freaking happy with the numbers! Now I’m just fixing little stuff here and there. Plus we have track this weekend so I’m prepping for that. Hopefully it all goes well
0 2018/03/15 11:59:46
Finished the final coolant bleeding which means it’s ready for tune!
Finished the final coolant bleeding which means it’s ready for tune!
0 2018/02/26 20:16:40
Look why finally came in today guys! Hopefully I’ll have it together tonight and we can finally start this thing
Look why finally came in today guys! Hopefully I’ll have it together tonight and we can finally start this thing
0 2018/02/22 13:44:31
Test fitted the slicks I bought last week. Looks good but my fronts are to wide. 24.5x9.5 id be more comfortable with 24.5x8.5 but way to excited! Trying to have this ready by March 18th for Sacramento
Test fitted the slicks I bought last week. Looks good but my fronts are to wide. 24.5x9.5 id be more comfortable with 24.5x8.5 but way to excited! Trying to have this ready by March 18th for Sacramento
0 2018/02/15 07:50:41
Almost there! Just waiting on a fuel pressure regulator and need to finish up a couple vacuum lines and we can finally start this thing.
Almost there! Just waiting on a fuel pressure regulator and need to finish up a couple vacuum lines and we can finally start this thing.
0 2018/02/10 07:33:21
And this is what we came up with. There is probably a couple centimeters between the coupler and the banjo bolt. We are not sure how well it will hold up but we are going to try and see
And this is what we came up with. There is probably a couple centimeters between the coupler and the banjo bolt. We are not sure how well it will hold up but we are going to try and see
0 2018/02/06 17:40:02
Had a buddy of mine machine down the throttle body adapter to crest as much room as possible
Had a buddy of mine machine down the throttle body adapter to crest as much room as possible
0 2018/02/06 17:37:22
Here’s my issues I’m running into. I can’t seem to get anything to fit in this area. I guess that’s why you don’t see these manifolds on a rhd chassis
Here’s my issues I’m running into. I can’t seem to get anything to fit in this area. I guess that’s why you don’t see these manifolds on a rhd chassis
0 2018/01/17 18:58:53
Just got the last part I was waiting for
Just got the last part I was waiting for
0 2018/01/15 13:18:19
Throttle body and adapter came in today. Just waiting on the iacv adapter then I can move forward with installing the manifold.
Throttle body and adapter came in today. Just waiting on the iacv adapter then I can move forward with installing the manifold.
0 2017/12/20 20:33:32
Plus I just picked up the ultra manifold so might wait to put this on before I tune 😬
Plus I just picked up the ultra manifold so might wait to put this on before I tune 😬
0 2017/12/09 10:09:34
Motor is back in and running once again. Waiting to figure out what I am going to do about tuning.
Motor is back in and running once again. Waiting to figure out what I am going to do about tuning.
0 2017/12/09 10:03:38
The long block is back together now. I wanted to change out the cam gear so I’m waiting to get one ordered before I put it back in the car.
The long block is back together now. I wanted to change out the cam gear so I’m waiting to get one ordered before I put it back in the car.
0 2017/10/24 19:05:06
Spent the day putting this thing back together. Set up is 75.5mm vitara pistons on a set of fj rods head will go on tomorrow
Spent the day putting this thing back together. Set up is 75.5mm vitara pistons on a set of fj rods head will go on tomorrow
0 2017/10/21 15:08:49
Back from the dead with an update. New block is dont and built by Ngoc at synergy auto works. Here we have 10.5:1 compression srp pistons on eagle rods. I had the head ported by a buddy of mine and then took it to Felix at Apm to do a valve job and throw new seals in it. Just waiting on motor mounts now and back in the car we go.
Back from the dead with an update. New block is dont and built by Ngoc at synergy auto works. Here we have 10.5:1 compression srp pistons on eagle rods. I had the head ported by a buddy of mine and then took it to Felix at Apm to do a valve job and throw new seals in it. Just waiting on motor mounts now and back in the car we go.
0 2017/05/01 08:04:13
Here's the bad part of it all.... noticed by the end of the track day that we were getting a lot of smoke out the catch can. Brought the car home did a compression and leak down test. Of course both were not good. Started digging into pulled the head off didn't notice much then pulled cylinder number 2 piston and bam there was the problem. Broken ring and chunks missing from the piston(where those cracks are is where it actually came off)
Here's the bad part of it all.... noticed by the end of the track day that we were getting a lot of smoke out the catch can. Brought the car home did a compression and leak down test. Of course both were not good. Started digging into pulled the head off didn't notice much then pulled cylinder number 2 piston and bam there was the problem. Broken ring and chunks missing from the piston(where those cracks are is where it actually came off)
0 2017/03/02 18:58:10
0 2017/03/02 18:57:09
0 2017/03/02 18:55:43
We took the car to the track and she ran a 12.1 so far....
We took the car to the track and she ran a 12.1 so far....
0 2017/03/02 18:55:36
Finally putting my downstar lugs to use. What's next? Well I still need to buy stop tech rotors and fix my oil leak. The weather has been raining and my car sits outside so it's hard to work on but we will get there in due time
Finally putting my downstar lugs to use. What's next? Well I still need to buy stop tech rotors and fix my oil leak. The weather has been raining and my car sits outside so it's hard to work on but we will get there in due time
0 2017/01/02 18:52:50
Karcept hubs installed
Karcept hubs installed
0 2017/01/02 18:52:46
Finally we can put the downstar spiked lugs to use. I'll hopefully have these installed next week. Depending upon how the weather is.
Finally we can put the downstar spiked lugs to use. I'll hopefully have these installed next week. Depending upon how the weather is.
0 2016/12/14 19:29:34
Karcept hubs came in yesterday
Karcept hubs came in yesterday
0 2016/12/14 19:29:31