Honda-Tech - Honda Forum Discussion
Test fitted the slicks I bought last week. Looks good but my fronts are to wide. 24.5x9.5 id be more comfortable with 24.5x8.5 but way to excited! Trying to have this ready by March 18th for Sacramento
Test fitted the slicks I bought last week. Looks good but my fronts are to wide. 24.5x9.5 id be more comfortable with 24.5x8.5 but way to excited! Trying to have this ready by March 18th for Sacramento
0 2018/02/15 07:50:41
Look why finally came in today guys! Hopefully I’ll have it together tonight and we can finally start this thing
Look why finally came in today guys! Hopefully I’ll have it together tonight and we can finally start this thing
0 2018/02/22 13:44:31
Finished the final coolant bleeding which means it’s ready for tune!
Finished the final coolant bleeding which means it’s ready for tune!
0 2018/02/26 20:16:40
Just got the car tuned at ldl in Sacramento! Car made 350 on a mustang dyno. Pretty freaking happy with the numbers! Now I’m just fixing little stuff here and there. Plus we have track this weekend so I’m prepping for that. Hopefully it all goes well
Just got the car tuned at ldl in Sacramento! Car made 350 on a mustang dyno. Pretty freaking happy with the numbers! Now I’m just fixing little stuff here and there. Plus we have track this weekend so I’m prepping for that. Hopefully it all goes well
0 2018/03/15 11:59:46
0 2018/03/15 11:59:52
So this is how the car sits right now. She’s running driving great! I couldn’t be happier with it. I got some parts coming in that I’m excited about and hopefully I can start updating this thread again. So stay tuned. I know I’m not on here every day so bare with me.
So this is how the car sits right now. She’s running driving great! I couldn’t be happier with it. I got some parts coming in that I’m excited about and hopefully I can start updating this thread again. So stay tuned. I know I’m not on here every day so bare with me.
0 2018/07/02 21:42:49
Today I installed a torque mount to try and keep the pressure off the rear mount due to my subframe being for b series because of the rhd.
Today I installed a torque mount to try and keep the pressure off the rear mount due to my subframe being for b series because of the rhd.
0 2018/07/03 17:56:17
0 2018/07/17 19:35:04
Took her out to cruise 2 Cruz last weekend and had a blast. Had great feedback on her. It was probably the longest I have ever drove her about 100 miles round trip. I have found we have a little over heating issue. I believe it’s really just from heat soak and it’s been pretty hot here. I pulled the manifold off to go get it ceramic coated. Going to build a fan shroud and try to make an intake for the turbo.
Took her out to cruise 2 Cruz last weekend and had a blast. Had great feedback on her. It was probably the longest I have ever drove her about 100 miles round trip. I have found we have a little over heating issue. I believe it’s really just from heat soak and it’s been pretty hot here. I pulled the manifold off to go get it ceramic coated. Going to build a fan shroud and try to make an intake for the turbo.
0 2018/07/25 06:40:40
Relocated the license plate bracket today now the intercooler and radiator should be getting full air to it. Sent my manifold off to get ceramic coated so just waiting for that to get back to put the car back together. Picked up a new oil feed line because my other one the fitting was kinda messed up on it. Also picked up new hoses that I will throw on eventually.
Relocated the license plate bracket today now the intercooler and radiator should be getting full air to it. Sent my manifold off to get ceramic coated so just waiting for that to get back to put the car back together. Picked up a new oil feed line because my other one the fitting was kinda messed up on it. Also picked up new hoses that I will throw on eventually.
0 2018/07/30 17:51:00
Finally! After 3 weeks finally got my sheepey manifold back from ceramic coating and damn it looks so good! Tomorrow I will get the car back together and take her for a drive again!
Finally! After 3 weeks finally got my sheepey manifold back from ceramic coating and damn it looks so good! Tomorrow I will get the car back together and take her for a drive again!
0 2018/08/13 20:58:34
Updated pic of the engine bay. New skunk hoses and the manifolds in. Car runs pretty good so far
Updated pic of the engine bay. New skunk hoses and the manifolds in. Car runs pretty good so far
0 2018/08/22 17:19:28
0 2018/08/28 20:25:21
0 2018/09/22 07:56:37
Picked up 2 225/50 advan ao48s and damn what a difference these made over my 205/50 nitto nto5
Picked up 2 225/50 advan ao48s and damn what a difference these made over my 205/50 nitto nto5
0 2018/09/22 07:56:37
In with the new carpet thanks to hmo
In with the new carpet thanks to hmo
0 2018/12/17 10:41:19
Out with the old carpet
Out with the old carpet
0 2018/12/17 10:41:19
As you can see the headgasket was pretty blown
As you can see the headgasket was pretty blown
0 2019/01/14 08:39:51
Yesterday finally got the motor out and apart
Yesterday finally got the motor out and apart
0 2019/01/14 08:39:51
All new parts went into it. Including a new bad guys oil pump. New arp headstuds flywheel bolts and pressure plate bolts. All new gaskets from Honda. Hoping to race more this year 🙏🏼
All new parts went into it. Including a new bad guys oil pump. New arp headstuds flywheel bolts and pressure plate bolts. All new gaskets from Honda. Hoping to race more this year 🙏🏼
0 2019/01/14 08:39:51
Motor is finally back in. Going to send my radiator out to have a shroud built for it then I’ll finish it up.
Motor is finally back in. Going to send my radiator out to have a shroud built for it then I’ll finish it up.
0 2019/02/20 14:19:09
Fan shroud complete and switching to an hose so had bungs welded on the radiator. Now going to get the thermostat and water neck done then we can fire her up
Fan shroud complete and switching to an hose so had bungs welded on the radiator. Now going to get the thermostat and water neck done then we can fire her up
0 2019/03/15 15:55:36
What a headache this car has been. Road block after road block. It was all my fault in poor planning. I guess I never realized how big -16 fittings were. Had to send my radiator back out to get the bung relocated. Will pick it back up on Monday. Then had to exchange some fittings so just waiting for new ones to come in. We are finally so close to being back on the road finally.
What a headache this car has been. Road block after road block. It was all my fault in poor planning. I guess I never realized how big -16 fittings were. Had to send my radiator back out to get the bung relocated. Will pick it back up on Monday. Then had to exchange some fittings so just waiting for new ones to come in. We are finally so close to being back on the road finally.
0 2019/06/08 21:16:55
Sometimes you really just want to burn the car down 😂 next stop is to my fabricators house. Obviously my “measurements” are way off
Sometimes you really just want to burn the car down 😂 next stop is to my fabricators house. Obviously my “measurements” are way off
0 2019/06/15 08:22:10
Car is rocking! Got her running a couple days ago and it’s felt so great driving it!
Car is rocking! Got her running a couple days ago and it’s felt so great driving it!
0 2019/06/29 19:19:05
Just picked this up to test fitment. Looks like it will work the way I’m planning on running lines/cooler.
Just picked this up to test fitment. Looks like it will work the way I’m planning on running lines/cooler.
0 2019/07/28 17:31:04
My sunroof never worked ever since I owned the car. Finally took the time to diagnose it and found out I was missing 2 of the 4 bump stops. Plus the 2 that I had were broken. Did some research and found gregparts. He 3D prints new ones. Got them on and now I have a working sun roof
My sunroof never worked ever since I owned the car. Finally took the time to diagnose it and found out I was missing 2 of the 4 bump stops. Plus the 2 that I had were broken. Did some research and found gregparts. He 3D prints new ones. Got them on and now I have a working sun roof
0 2019/08/14 06:58:15
0 2019/08/23 14:41:25
Just picked up new door sashes and roof moldings. Have a couple more things on the way/ in the works for the crx. Pretty excited to be back on this thing
Just picked up new door sashes and roof moldings. Have a couple more things on the way/ in the works for the crx. Pretty excited to be back on this thing
0 2019/08/23 14:42:19
0 2019/08/28 20:49:31
Just installed new 310 billet hinges with some new downstar hardware
Just installed new 310 billet hinges with some new downstar hardware
0 2019/08/28 20:50:26
Updated engine bay pic. New downstar hardware went with black beauty washers and gold zinc bolts. Also finally took care of my windshield cowl. Was missing bolts and clips on it before. Now it’s all secured. Still have more parts on the way for this thing. Really liking how it’s all coming together.
Updated engine bay pic. New downstar hardware went with black beauty washers and gold zinc bolts. Also finally took care of my windshield cowl. Was missing bolts and clips on it before. Now it’s all secured. Still have more parts on the way for this thing. Really liking how it’s all coming together.
0 2019/09/09 07:34:56
Wheels got refinished jut need to add the stickers again which I got from over seas.
Wheels got refinished jut need to add the stickers again which I got from over seas.
0 2019/09/25 16:07:27
0 2019/11/30 19:40:47
0 2019/11/30 19:40:53
Car was down for a minute. Drove it to work one day and had a grind going into 3rd and 4th. I feared the worse. Located a used zc trans from hushperformance. Finally once I received the trans from them decided to take my car apart and pull the trans with the grind apart only to find a broken shift fork. Took apart the hush trans pulled the shift forks and swapped them into the zc trans. Put it all back together and the car has been running pretty good. I am gaining more and more confidence in it
Car was down for a minute. Drove it to work one day and had a grind going into 3rd and 4th. I feared the worse. Located a used zc trans from hushperformance. Finally once I received the trans from them decided to take my car apart and pull the trans with the grind apart only to find a broken shift fork. Took apart the hush trans pulled the shift forks and swapped them into the zc trans. Put it all back together and the car has been running pretty good. I am gaining more and more confidence in it
0 2020/07/11 11:06:37
0 2021/11/14 07:51:54
0 2021/11/14 07:51:59
Forgot about my thread. Where to begin on an update…we’ll after over a year a paint she was finally done with the body. Wanted a cream color and came across this color and it was it for me. Super happy with how it turned out.
Forgot about my thread. Where to begin on an update…we’ll after over a year a paint she was finally done with the body. Wanted a cream color and came across this color and it was it for me. Super happy with how it turned out.
0 2021/11/14 07:52:37
Forgot about my thread. Where to begin on an update…well after over a year in paint she was finally done with the body. Wanted a cream color and came across this color and it was it for me. Super happy with how it turned out.
Forgot about my thread. Where to begin on an update…well after over a year in paint she was finally done with the body. Wanted a cream color and came across this color and it was it for me. Super happy with how it turned out.
0 2021/11/14 07:57:10