Honda-Tech - Honda Forum Discussion
Another view, 4th and 5th from the top to the right of the row of solder joints halfway to the right
Another view, 4th and 5th from the top to the right of the row of solder joints halfway to the right
0 2025/03/25 19:30:18
Cracks on the 4th and 5th solder joints from the left above the long line of solder joints in the middle
Cracks on the 4th and 5th solder joints from the left above the long line of solder joints in the middle
0 2025/03/25 19:25:45
Cam rails are on
Cam rails are on
0 2024/11/12 19:41:42
Middle 3 cam holders are on
Middle 3 cam holders are on
0 2024/11/12 19:40:26
Cams out, assembly lube brushed on
Cams out, assembly lube brushed on
0 2024/11/12 19:39:22
New timing belt is in
New timing belt is in
0 2024/08/28 22:23:25
0 2024/08/28 22:22:01
Checked the sizes and the number of teeth, they matched up
Checked the sizes and the number of teeth, they matched up
0 2024/08/28 22:21:00
Old timing belt and new OEM timing belt still in the package
Old timing belt and new OEM timing belt still in the package
0 2024/08/28 22:19:57
Engine supported from below, motor mount off to remove the old timing belt
Engine supported from below, motor mount off to remove the old timing belt
0 2024/08/28 22:18:36
Scotch brite got the old gasket material off the mating surface
Scotch brite got the old gasket material off the mating surface
0 2024/08/18 20:36:32
The old NPW water pump has 3 dowels, the bew Honda one doesn't have them
The old NPW water pump has 3 dowels, the bew Honda one doesn't have them
0 2024/08/18 20:34:22
Needed 2 breaker bars and the crank pulley tool to loosen the crank pulley bolt
Needed 2 breaker bars and the crank pulley tool to loosen the crank pulley bolt
0 2024/08/18 20:32:35
Old timing belt
Old timing belt
0 2024/08/18 20:31:33
Don! plug in place and about to fill the overflow bottle
Don! plug in place and about to fill the overflow bottle
0 2024/07/11 18:25:12
Old (brown) capacitors out, 1 new capacitor soldered in
Old (brown) capacitors out, 1 new capacitor soldered in
0 2024/07/07 18:12:26
New capacitors
New capacitors
0 2024/07/07 18:12:20
Brown marks on top of the old capacitors, but the tops are not split open
Brown marks on top of the old capacitors, but the tops are not split open
0 2024/07/07 18:12:13
Speedometer board removed
Speedometer board removed
0 2024/07/07 18:12:06
Speedometer removed
Speedometer removed
0 2024/07/07 18:12:00
Gauge cluster separated
Gauge cluster separated
0 2024/07/07 18:11:51
upper left solder joint in the speedometer section (middle), re-flowed
upper left solder joint in the speedometer section (middle), re-flowed
0 2024/07/07 18:05:28
0 2024/04/21 17:35:28
0 2024/04/21 17:35:22
0 2024/04/21 17:35:16
0 2024/04/21 17:35:07
0 2024/04/21 17:35:00
3M structural adhesive, RH rear quarter panel, and 2-part epoxy squeeze gun
3M structural adhesive, RH rear quarter panel, and 2-part epoxy squeeze gun
0 2024/04/21 17:30:30
kms not miles, but still...
kms not miles, but still...
0 2023/12/02 16:07:01
0 2023/08/16 07:57:56
0 2023/08/14 16:57:28
S-pipe pushed against the heat shield
S-pipe pushed against the heat shield
0 2023/08/14 16:56:16
Resonator pipe pushed back 1 1/2"
Resonator pipe pushed back 1 1/2"
0 2023/08/14 16:56:13
0 2023/08/14 16:55:44
0 2023/08/14 16:55:41
0 2023/08/14 16:55:37
0 2023/08/14 16:53:40
S-pipe pushed back 1 1/2", against the back of the heat shield
S-pipe pushed back 1 1/2", against the back of the heat shield
0 2023/08/14 16:53:27
Resonator pipe pushed back 1 1/2"
Resonator pipe pushed back 1 1/2"
0 2023/08/14 16:53:08
In the dark
In the dark
0 2023/03/12 19:18:32