Rota Slipstream special order - 15x8, 5x114.3 bolt pattern!!
#27
Honda-Tech Member
Join Date: Jul 2004
Location: southwest, PA, USA
Posts: 3,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: (AbeFroeman)
117- BlackR and I are going to buy 2 wheels each. just wondering how you want use to do the deposit and how they will be shipped to us?
#28
Honda-Tech Member
BoostR41 and I would like to go in together on a set - 2 wheels for him and 2 for me.
Is the offset already a done deal?
Is +35 or even +30 possible? (If you do +25 I'll buy a full set my damn self!)
Either way, we're down to get a set.
Is the offset already a done deal?
Is +35 or even +30 possible? (If you do +25 I'll buy a full set my damn self!)
Either way, we're down to get a set.
#29
Honda-Tech Member
Thread Starter
I received some deposits today. I'll send confirmation e-mails later tonight.
I did get one bit of bad news for those of you thinking of waiting. After the order is placed, another order will require a minimum of 10 buyers. If you're thinking of buying a set, now really is the time to do it. I'll hold off until Friday to formally place the order.
2 wheels each is fine. Shipping might be just a tad more expensive, so be prepared for that. You'll each need to give a $50 deposit.
BlackR, the problem with lower offset is that some people could run into outer fender clearance issues. It's easy to take away offset by using spacers, but just about impossible to add offset once the wheel is produced. I chose the +40mm offset to be the best compromise for everyone. I'm planning to run 5mm spacers if I want to get a little more track width out of them, and if I ever go with a larger brake setup on the front, I'd like to be able to use spacers if I need the additional clearance.
I did get one bit of bad news for those of you thinking of waiting. After the order is placed, another order will require a minimum of 10 buyers. If you're thinking of buying a set, now really is the time to do it. I'll hold off until Friday to formally place the order.
2 wheels each is fine. Shipping might be just a tad more expensive, so be prepared for that. You'll each need to give a $50 deposit.
BlackR, the problem with lower offset is that some people could run into outer fender clearance issues. It's easy to take away offset by using spacers, but just about impossible to add offset once the wheel is produced. I chose the +40mm offset to be the best compromise for everyone. I'm planning to run 5mm spacers if I want to get a little more track width out of them, and if I ever go with a larger brake setup on the front, I'd like to be able to use spacers if I need the additional clearance.
#30
Honda-Tech Member
Re: (117)
oh well on the offset thing... we'll just make do...
btw, I'm trying to paypal you my deposit and that link isn't working for me.
what's the correct paypal addy?
btw, I'm trying to paypal you my deposit and that link isn't working for me.
what's the correct paypal addy?
#31
Honda-Tech Member
Join Date: Jul 2004
Location: southwest, PA, USA
Posts: 3,054
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Black R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R »</TD></TR><TR><TD CLASS="quote">oh well on the offset thing... we'll just make do...
btw, I'm trying to paypal you my deposit and that link isn't working for me.
what's the correct paypal addy? </TD></TR></TABLE>
btw, I'm trying to paypal you my deposit and that link isn't working for me.
what's the correct paypal addy? </TD></TR></TABLE>
#33
Honda-Tech Member
Thread Starter
You guys have an IM.
For two wheels, you'll need to find someone to buy the other two. I can only order in sets of four. Cost is $550 for a set, so you'll have to pay half that ($275), but it could be a little higher due to higher shipping. Specifiations are listed on the very first post and colors available are black or polished with a silver background.
For two wheels, you'll need to find someone to buy the other two. I can only order in sets of four. Cost is $550 for a set, so you'll have to pay half that ($275), but it could be a little higher due to higher shipping. Specifiations are listed on the very first post and colors available are black or polished with a silver background.
#36
Honda-Tech Member
Thread Starter
I really haven't done much on H-T.com. There are some people that come here that have known me for a long time like bdb, alphajesse, and a couple of others.
#37
Re: (117)
still available?
thinking about getting the polished ones... I can paypal the deposit today...
actually you can't get 16"s can you? i don't think 15"s will clear my brakes...
thinking about getting the polished ones... I can paypal the deposit today...
actually you can't get 16"s can you? i don't think 15"s will clear my brakes...
#39
Honda-Tech Member
Thread Starter
Re: (Black R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R »</TD></TR><TR><TD CLASS="quote">I just paypal'd my deposit!
</TD></TR></TABLE>
We got it. I haven't seen the other half though from the other guy.
</TD></TR></TABLE>
We got it. I haven't seen the other half though from the other guy.
#42
Honda-Tech Member
Join Date: Sep 2004
Location: downshifting into 5th,, nyc, usa
Posts: 1,390
Likes: 0
Received 1 Like
on
1 Post
Re: (117)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 117 »</TD></TR><TR><TD CLASS="quote">If you order at least 10 sets at a time.</TD></TR></TABLE>
i was hoping that since the drilling is the easy part they might be willing to do one at 4x100. or even just provide an undrilled set.
i was hoping that since the drilling is the easy part they might be willing to do one at 4x100. or even just provide an undrilled set.
#43
Honda-Tech Member
Re: (rsca_crx)
There are other group buys going on for 4x100 over at
http://sccaforums.com/forums/thread/176981.aspx
http://sccaforums.com/forums/thread/176981.aspx
#44
Honda-Tech Member
Thread Starter
Everyone should have received a confirmation e-mail today with all the details on the order. If you did not receive a confirmation e-mail, please let me know!
#50
Honda-Tech Member
Join Date: Nov 2005
Location: great white north, ont, canada
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jeremy D. Swain)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jeremy D. Swain »</TD></TR><TR><TD CLASS="quote">Is this still going on?</TD></TR></TABLE>
PM ME!
PM ME!
Thread
Thread Starter
Forum
Replies
Last Post
-JayLu-
For Sale
3
05-08-2007 06:31 PM