D2 Coilover Debut from Heeltoe Automotive!!!
06-27-2005, 12:24 AM
#101
.likes trains
Join Date: Oct 2004
Location: Outer Space
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Re: (implayaz9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by implayaz9 »</TD></TR><TR><TD CLASS="quote">do u just adjust the height using the small **** at the top or??</TD></TR></TABLE>
nope that would be your damping level
look at the 2nd to last picture on the first post. those things on the bottom that look like "gears" adj your height.
nope that would be your damping level
look at the 2nd to last picture on the first post. those things on the bottom that look like "gears" adj your height.
07-11-2005, 12:43 PM
#103
Junior Member
Re: D2 Coilover Debut from Heeltoe Automotive!!! Great parts and service!!!! (MrHeeltoe)
i got some of these coilovers and just want to make sure on something...
when adjusting the dampening, do you simply turn the **** on top?
or do you have to loosen the nut underneath it first?
it may just be me, but the **** seems damned hard to turn!
when adjusting the dampening, do you simply turn the **** on top?
or do you have to loosen the nut underneath it first?
it may just be me, but the **** seems damned hard to turn!
07-11-2005, 01:04 PM
#104
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! Great parts and service!!!! (pgpunkguy)
They are a little different than other systems, but yes, you just turn the **** on top after you install it.
07-11-2005, 01:19 PM
#106
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! (sound x bomber)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sound x bomber »</TD></TR><TR><TD CLASS="quote">not sure if it was previously asked? but are these going to be available for 92-96 preludes?</TD></TR></TABLE>
yes, they are
yes, they are
07-12-2005, 01:54 AM
#108
Banned
Join Date: Jul 2001
Location: Southern California..., Torrance/Gardena
Posts: 5,939
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! (NYoKo_Dc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NYoKo_Dc2 »</TD></TR><TR><TD CLASS="quote">how much for an 01 integra with F 13 R 9 spring rates picked up? Thanks </TD></TR></TABLE>
me too, but in 12k 10k
</TD></TR></TABLE>me too, but in 12k 10k
07-12-2005, 08:35 AM
#109
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! (NYoKo_Dc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NYoKo_Dc2 »</TD></TR><TR><TD CLASS="quote">how much for an 01 integra with F 13 R 9 spring rates picked up? Thanks </TD></TR></TABLE>
Send pms....
You guys know the DC2 comes with 15/9, right? You only need to get one pair of springs then...
</TD></TR></TABLE>Send pms....
You guys know the DC2 comes with 15/9, right? You only need to get one pair of springs then...
07-21-2005, 07:20 PM
#110
Honda-Tech Member
Join Date: Jan 2004
Location: Dayton, Ohio, USA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
got my D2 set-up from Marcus a couple of weeks ago but have been out of town ever since I installed them so I didnt get much time to try them out. Marcus' customer service was awesome and the suspenion looks great.
07-25-2005, 05:15 PM
#112
Honda-Tech Member
Join Date: Jul 2005
Location: Tustin, CA, United States
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! Great parts and service!!!! (MrHeeltoe)
Hey Heeltoe,
I'm looking for a set of coilovers for my 2001 ITR. I don't know much about spring rates, but Im just looking for a set that I can lower the car on my new 17 inch TE37s. The ride on the stock system is a bit soft for me, so I would rely on you on what you would recommend as a set up for me. My car is modded by NA. Please let me know price and your recommended set up. Thanks. Everyone seems to be recommending your product so I'm going with with the H-T boys.
Stick-e-rice
I'm looking for a set of coilovers for my 2001 ITR. I don't know much about spring rates, but Im just looking for a set that I can lower the car on my new 17 inch TE37s. The ride on the stock system is a bit soft for me, so I would rely on you on what you would recommend as a set up for me. My car is modded by NA. Please let me know price and your recommended set up. Thanks. Everyone seems to be recommending your product so I'm going with with the H-T boys.
Stick-e-rice
07-26-2005, 08:41 AM
#114
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! Great parts and service!!!! (Stick-e-rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stick-e-rice »</TD></TR><TR><TD CLASS="quote">Hey Heeltoe,
I'm looking for a set of coilovers for my 2001 ITR. I don't know much about spring rates, but Im just looking for a set that I can lower the car on my new 17 inch TE37s. The ride on the stock system is a bit soft for me, so I would rely on you on what you would recommend as a set up for me. My car is modded by NA. Please let me know price and your recommended set up. Thanks. Everyone seems to be recommending your product so I'm going with with the H-T boys.
Stick-e-rice</TD></TR></TABLE>
I think D2 is a great coilover with lots of features for the money. It is a good entry leve high performance suspension As far as rates go, don't change them. Not right away. The new fad is to change around springs all over the place, and I think it is silly. Many of these people are not experienced or educated enough to swap around.
My advise....if you need help changing rates, don't change them. Get the system. See what you thing...change later if you feel the need. Otherwise you are worrying about something that you don't need to!
I'm looking for a set of coilovers for my 2001 ITR. I don't know much about spring rates, but Im just looking for a set that I can lower the car on my new 17 inch TE37s. The ride on the stock system is a bit soft for me, so I would rely on you on what you would recommend as a set up for me. My car is modded by NA. Please let me know price and your recommended set up. Thanks. Everyone seems to be recommending your product so I'm going with with the H-T boys.
Stick-e-rice</TD></TR></TABLE>
I think D2 is a great coilover with lots of features for the money. It is a good entry leve high performance suspension As far as rates go, don't change them. Not right away. The new fad is to change around springs all over the place, and I think it is silly. Many of these people are not experienced or educated enough to swap around.
My advise....if you need help changing rates, don't change them. Get the system. See what you thing...change later if you feel the need. Otherwise you are worrying about something that you don't need to!
07-29-2005, 07:02 AM
#116
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: D2 Coilover Debut from Heeltoe Automotive!!! Great parts and service!!!! (MrHeeltoe)
BUMP!
Most apps vailable for immediate shipping...no long waiting! No group buy! No shady deals!
Most apps vailable for immediate shipping...no long waiting! No group buy! No shady deals!
08-02-2005, 09:56 PM
#118
Honda-Tech Member
Join Date: Jul 2005
Location: Tustin, CA, United States
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MrHeeltoe)
Bump for Marcus, an honest man who is willing to answer questions; even for a Noob.
Just installed a set of D2, eventhough some are saying these are pieces of ****. They are awesome and a killer deal. Couldn't be happier.
SOCAL noobs come here. Marcus will hook u up with prices and will match everything.
Ton.
Just installed a set of D2, eventhough some are saying these are pieces of ****. They are awesome and a killer deal. Couldn't be happier.
SOCAL noobs come here. Marcus will hook u up with prices and will match everything.
Ton.
08-03-2005, 08:27 AM
#119
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Stick-e-rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stick-e-rice »</TD></TR><TR><TD CLASS="quote">Bump for Marcus, an honest man who is willing to answer questions; even for a Noob.
Just installed a set of D2, eventhough some are saying these are pieces of ****. They are awesome and a killer deal. Couldn't be happier.
SOCAL noobs come here. Marcus will hook u up with prices and will match everything.
Ton. </TD></TR></TABLE>
Haha, despite what you read online, Noobs are people too.
Just installed a set of D2, eventhough some are saying these are pieces of ****. They are awesome and a killer deal. Couldn't be happier.
SOCAL noobs come here. Marcus will hook u up with prices and will match everything.
Ton.
</TD></TR></TABLE>Haha, despite what you read online, Noobs are people too.
08-09-2005, 11:46 AM
#122
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: (d6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d6 »</TD></TR><TR><TD CLASS="quote">does anyone know the max drop on an ek without affecting pre-load?</TD></TR></TABLE>
We put a set on a DC2 and we were tucking tire with at least another inch more lowering available! Of course, we could have gone 1.5-2" up from there too....(this is all without touching the spring pearch).
These will meet your lowering needs! And they ride VERY VERY NICE!
We put a set on a DC2 and we were tucking tire with at least another inch more lowering available! Of course, we could have gone 1.5-2" up from there too....(this is all without touching the spring pearch).
These will meet your lowering needs! And they ride VERY VERY NICE!
08-17-2005, 08:42 AM
#124
Thread Starter
Join Date: Aug 2003
Location: Mission Viejo, CA, USA
Posts: 3,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Felix.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Felix. »</TD></TR><TR><TD CLASS="quote">Whats the standard spring rate for civic EK</TD></TR></TABLE>
11 kg front, and 7 kg rear
11 kg front, and 7 kg rear
