FS: Weld Magnum Import Drag Wheels 13x8 with MT 24.5" Slicks
#1
Thread Starter
iTrader: (3)
FS: Weld Magnum Import Drag Wheels 13x8 with MT 24.5" Slicks
Used but in good usable condition Weld 13"x8" Magnum Import Drag Wheels with Mickey Thompson 24.5"x9"x13" ET Drag Slicks Mounted.
The Weld wheels feature a 5" Backspacing, are a 4x100 Lug Pattern and are already drilled and have rim screws installed as well.
The tires have seen better days. We aren't 100% sure the # of passes on the slicks but I would venture to guess at least 25+ by their condition.
One of the slicks also has a groove cut into it from what we would believe to be from the front of the car they were mounted on during braking after a 1/4 mile pass. The groove isn't cut very deep and that slick is still in usable condition but we wouldn't recommend using it for very long but you can surely get some passes out of it before you decide to swap it out for another one or a whole new pair of slicks.
This is a great chance to one of the best drag wheel setups at a fraction of the price of buying all the parts new.
sold sold sold sold sold sold sold sold sold sold sold
The Weld wheels feature a 5" Backspacing, are a 4x100 Lug Pattern and are already drilled and have rim screws installed as well.
The tires have seen better days. We aren't 100% sure the # of passes on the slicks but I would venture to guess at least 25+ by their condition.
One of the slicks also has a groove cut into it from what we would believe to be from the front of the car they were mounted on during braking after a 1/4 mile pass. The groove isn't cut very deep and that slick is still in usable condition but we wouldn't recommend using it for very long but you can surely get some passes out of it before you decide to swap it out for another one or a whole new pair of slicks.
This is a great chance to one of the best drag wheel setups at a fraction of the price of buying all the parts new.
sold sold sold sold sold sold sold sold sold sold sold
Last edited by Innes; 07-23-2009 at 06:36 AM.