I recently bought a set of Racing Hart Spinner Mesh 15" 6.5j 4h 114.3mm from a member on this board. There is a special key that is needed to lock and unlock these wheels. Below is a picture of the set. If anyone knows where I can find a key PLEASE MSG ME. Behind the spinner it says 175 if that helps out.




Modified by Jugga at 2:09 AM 2/20/2008

 

i will ask around..

if the spinner cap has a hole in the side that accepts a set screw then u can use that as well to secure the caps.. what i like to do is tap a thread hole onto the side and then get a set screw so at least the spinner will stay secure onto the hub.... i would not roll on these wheels w/ the caps without securing them w/ the set screw and or the magnetic key.. they will fly off on the freeway...

 

yea it does have a hole for the set screw, i just need the key to release the spinner part. thanks for the lookout.

 

so you are saying that the caps are locked onto the wheels?!??.... please don't tell me that

 

This part spins and locks the center of the wheel. Right in the center of this part lies a space to enter a key of some sort. Now only 1 out of the 4 wheels is locked, meaning i can't spin it loose, it can only tighten further. The other rims are fine.

 

thanks for the info but trust me, i know exactly what you are talking about. i own maybe 4 sets of just spinner type ssr/works.... fortunately, i either have the key for mine or i use the set screw to lock them while in use..

this is gonna take a lot of patience on your part but the key WILL show up.. oh and i am the same guy you contacted on club4ag w/ the thread..

i am known to help people complete their wheels whether it's valve stem caps or full out center caps and plates.. ask about me

 

Thank you VERY much indeed on all the help you are providing, cheers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">thanks for the info but trust me, i know exactly what you are talking about. i own maybe 4 sets of just spinner type ssr/works.... fortunately, i either have the key for mine or i use the set screw to lock them while in use..

this is gonna take a lot of patience on your part but the key WILL show up.. oh and i am the same guy you contacted on club4ag w/ the thread..

i am known to help people complete their wheels whether it's valve stem caps or full out center caps and plates.. ask about me </TD></TR></TABLE>

Opossum Jenkins is the man.......if some one can find it he will......

 

Yeah, Opossum Jenkins always get's the job done