My clutch pedal bracket broke and i am having a very hard time taking it out to weld it. Im contemplating welding it right where it lays, in the cabin. The only problem is its very close to wires and the fuse box. is it ok to do without hurting the electrical components of the car?

Im using a century 90 amp wire fed wig welder.

 

disconnect battery and ground close

 

thanks so much. ill make you proud.

 

Get a fire retardant blanket to lay around the area. You don't want to light the car on fire or get tons of spatter on the plastic and stuff.

 

a wig welder? damn... must be something new... lol jk

my advice, get some duct tape and tape up some fire cloth around the fuse box and wires and stuff... if you dont have that, some old blue jeans should work.. or something leather...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9295EJ-t &raquo;</TD></TR><TR><TD CLASS="quote">a wig welder? damn... must be something new... lol jk</TD></TR></TABLE>

yeah, haven't you heard it's the new welding process. lol

more on track like everyone else said make sure you cover to entire area where you are welding especially the carpet. A little spatter, sparks and poof FIRE!.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KENetics1 &raquo;</TD></TR><TR><TD CLASS="quote">

yeah, haven't you heard it's the new welding process. lol

more on track like everyone else said make sure you cover to entire area where you are welding especially the carpet. A little spatter, sparks and poof FIRE!.</TD></TR></TABLE>

haha its all apart of my secret welding techniques. ill cover all the carpet! thanks guys.