wanted exhaust shop in los angeles for some exhaust fab work
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: los angeles, ca, usa
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
wanted exhaust shop in los angeles for some exhaust fab work
does anybody know a good exhaust shop in los angeles area preferably in san gabriel valley area. i already have a muffler i just need a custom 3inch piping fab'd up. i need a shop w/ a good rep and good quality work and i'm not looking to spend alot.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you.
#2
GDD Lonely Krew
supertuning in van nuys. hes great and just did my sciroccos exhaust. full 2.5 inch mandrel bent piping fitted up to a 4-1 race header. hes the man in LA, bit if a drive for you but worth it.
#3
Honda-Tech Member
Join Date: Oct 2004
Location: Pacoima, CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: (the_unknown)
I love honda-tech.com and the people on here:
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: los angeles, ca, usa
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Re: (danielm3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">I love honda-tech.com and the people on here:
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.</TD></TR></TABLE>
well i don't want my exhaust to be all fucked up, i'm looking for good decent quality work at a low price. i'm pretty sure there are a few shops that fit this description.
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.</TD></TR></TABLE>
well i don't want my exhaust to be all fucked up, i'm looking for good decent quality work at a low price. i'm pretty sure there are a few shops that fit this description.
#5
Honda-Tech Member
Join Date: Apr 2003
Location: 60ft garage, CA, USA
Posts: 5,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HKSuperSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">
...i'm pretty sure there are a few shops that fit this description.</TD></TR></TABLE>
Not hardly.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">
Good luck.</TD></TR></TABLE>
...i'm pretty sure there are a few shops that fit this description.</TD></TR></TABLE>
Not hardly.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">
Good luck.</TD></TR></TABLE>
#7
Honda-Tech Member
Join Date: Apr 2003
Location: LA, CA
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
Re: (the_unknown)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">does anybody know a good exhaust shop in los angeles area preferably in san gabriel valley area. i already have a muffler i just need a custom 3inch piping fab'd up. i need a shop w/ a good rep and good quality work and i'm not looking to spend alot.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you. </TD></TR></TABLE>
Can I ask how much you spent for the work?
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you. </TD></TR></TABLE>
Can I ask how much you spent for the work?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: los angeles, ca, usa
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EGPrelude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGPrelude »</TD></TR><TR><TD CLASS="quote">
Can I ask how much you spent for the work?</TD></TR></TABLE>
what do you mean. i haven't spent anything.
Can I ask how much you spent for the work?</TD></TR></TABLE>
what do you mean. i haven't spent anything.
#11
Re: (the_unknown)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the_unknown »</TD></TR><TR><TD CLASS="quote">supertuning in van nuys. hes great and just did my sciroccos exhaust. full 2.5 inch mandrel bent piping fitted up to a 4-1 race header. hes the man in LA, bit if a drive for you but worth it.</TD></TR></TABLE>
SUPERTUNING
SUPERTUNING
#13
Honda-Tech Member
Join Date: Oct 2004
Location: Pacoima, CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HKSuperSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">jesus christ fine than people can someone recommend a good muffler shop no MATTER THE PRICE!!!!</TD></TR></TABLE>
I am in Pacoima, CA with my own mandrel bender. I can make what you are looking for, more than likely out of one tube with no welding pretty much, for about $500. I would have to look at it to tell you an exact price.
I am in Pacoima, CA with my own mandrel bender. I can make what you are looking for, more than likely out of one tube with no welding pretty much, for about $500. I would have to look at it to tell you an exact price.
#14
Honda-Tech Member
Join Date: Apr 2006
Location: MESA, AZ, USA
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
#18
Honda-Tech Member
Join Date: Jun 2003
Location: Hilo, Hi
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Re: (808DB1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 808DB1 »</TD></TR><TR><TD CLASS="quote">you smoking dope or what ? paying 2900$ for a exhaust , thats insane if you ask me </TD></TR></TABLE>
Thats because you have no clue as to what it takes to make an item like the one in the picture. Besides its an Audi not a HONDA.
Exhaust looks great guys.
Thats because you have no clue as to what it takes to make an item like the one in the picture. Besides its an Audi not a HONDA.
Exhaust looks great guys.
#20
Re: (HKSuperSi)
LOL why would you come into welding/fab to ask this? most everyone here knows how to weld and will most likey advise you to DO IT YOURSELF
gasp!!!!!!!!!!!!!!!!!
you can work on cars yourself!!!!!??????????????
gasp!!!!!!!!!!!!!!!!!
you can work on cars yourself!!!!!??????????????
#22
Honda-Tech Member
Join Date: Apr 2006
Location: MESA, AZ, USA
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. The last exhaust for a civic we did ran about 600-700 total.
The audi required 2 downpipes, high end cats, flex pipes, vbands everywhere, and the turbo flanges were not a round port, but an upside down egg shaped port k03 flange.
The audi required 2 downpipes, high end cats, flex pipes, vbands everywhere, and the turbo flanges were not a round port, but an upside down egg shaped port k03 flange.
#24
Honda-Tech Member
Join Date: Aug 2004
Location: Nah man, Yemen
Posts: 4,197
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboSI56)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboSI56 »</TD></TR><TR><TD CLASS="quote">I used to deal with mazurri alot good customer service, but it sucked that they dont do 1d bends </TD></TR></TABLE>
My friend's IS300 is Mazzuri's test mule for their products. First round stuff was shitty because he can't weld to save his life, but now that he's got a welder, that stuff's top-notch.
My friend's IS300 is Mazzuri's test mule for their products. First round stuff was shitty because he can't weld to save his life, but now that he's got a welder, that stuff's top-notch.